National Technical University of Athens (NTUA)
Φασματοσκοπική μελέτη συμπαγών και στρωματικών ημιαγώγιμων υλικών, υπό ελαστική παραμόρφωση
Abstract
dc:descriptionThe subject of this dissertation is the study, through Raman spectroscopy, of the uniaxial stress influence on certain bulk cubic crystals, and the strain characterization of semiconductor systems. Finally, theoretical calculations are presented on of the elastic and lattice dynamical constants of polycrystalline films of cubic materials exhibiting texture along an arbitrary direction. The effect of uniaxial stress, on the long wavelength optical phonons of InSb and ZnS, is studied at room temperature using first order Raman scattering. From the observed frequency shifts and degeneracy splitting of both transverse-optical and longitudinal-optical phonons, values for the Phonon Deformation Potentials (PDP's) are obtained. Using the obtained PDP's, a strain characterization was carried out, on InSb-(lll) layers with regularly distributed Al contacts. The same PDP values are also used to analyze previously published results of strain effects in (001) InSb/Ini_xAlxSb super lattices. The PDP values of ZnS are also used to predict the LO phonon frequency shifts in strained (001) ZnTe/ZnS and (001) ZnSe/ZnS super lattices as a function of the layer thickness. Stress characterization has also performed on (001) freestanding crystalline silicon cantilever and large polycrystalline silicon membranes in the form of freestanding bridges and pads. Stresses within the above mentioned structures are measured through micro-Raman spectroscopy, and a different model was used in each case, in order to calculate the stresses from the observed Raman shifts. A detailed study of stress distribution along the cantilever, the membranes and the pads has performed, as a function of thickness and annealing treatment. Stress measurements are also, performed, on the surface of (001) Si substrates under S1O2 epilayers. A detailed study, also, of stress and strain distribution along the surface of the substrate has performed, as a function of thicknesses and different processing techniques of S1O2 epilayers, using an analytical line force model. Finally, based on the invariance properties of fourth-rank tensors, within the Voight-Reuss-Hill averaging procedure, the elastic stiffness and compliance of cubic polycrystalline materials exhibiting texture along arbitrary direction, were calculated. The computation is extended to the bulk and shear modulus as well as to Young's modulus, volume compressibility and Poisson's ratios. Numerical values and polar plots are given for all texture directions in the plane (110) of diamond and silicon.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2002
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Siakavellas, Michael
- Σιακαβέλλας, Μιχαήλ
Subjects
dc:subject × 16Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/13444