Back to search

University of Patras

Φασματοσκοπικός χαρακτηρισμός άμορφων και ημικρυσταλλικών πουλυμερών και νανοσύνθετων υλικών υπό την επίδραση μηχανικών, θερμικών και φωτοοξειδωτικών κατεργασιών

Abstract

dc:description

In the present study, a thorough spectroscopic analysis of syndiotactic polypropylene and its nanocomposites is conducted in an attempt to understand the cause of properties’ reinforcement of the nanocomposite materials in microscopic scale. In the first part of the study, Raman spectroscopy is used in order to investigate the phase transformations of sPP occuping during the application of stress, the relaxation from the applied stress and heating. The validity of these results are supported by the use of infrared spectroscopy. This is one of the most used techniques for the study of sPP. In the framework of the investigation on sPP, the phenomenon of stress-oscillation is studied for the first time by the means of infrared and Raman spectroscopies. This phenomenon is taking place during the formation of the neck upon the mechanical stretching of some polymers, which under certain but puzzling conditions starts to fluctuate with the time. The result of this fluctuation is the formation of a periodic motif of repeated transparent and opaque stripes perpendicular to the stretching direction. A certain explanation about the causes of the phenomenon is still missing. Films of sPP were subjected to a step-wise and sudden increase of external stress at room temperature in order to obtain the phenomenon of stress-oscillation. It is found that the striated regions present high chain transformation levels from the helical to the trans-planar conformations, while they do not showed the higher chain orientation. Along with the study of sPP, PET samples also revealed the phenomenon of stress-oscillation, are also investigated trying to elucidate the same phenomenon. Using infrared spectroscopy both in transmission and attenuated total reflection (ATR) mode, the striated regions are again found to show the highest transformation levels from one phase to another, while their orientation is not the highest. However, Raman spectroscopic studies proved that the transformation is accompanied with stress induced crystallization, while the opaque stripes contain much higher levels of crystallinity than the transparent chains do. Thus, we assume that the high crystallinity levels are the cause of the observed opacity. The ultimate object of the study of sPP was the thorough understanding of the behavior of this polymer, which is going to be used as a polymeric matrix in polymer nanocomposites production afterwards in this study. The nanocomposite materials, which are studied in this work, are prepared by melt interaction of the polymeric matrix with an organically modified montmorillonite (o-MMT). The aim of this study is the investigation of the changes in the polymeric structure that take place due to the presence of nanoclay and which are probably the cause of the enhanced properties of these materials according to literature references. FT-IR spectroscopy is the basic analytical technique used for the monitoring of the alternations in the polymer chains conformation because of the addition of the o-MMT. It is proved that the addition of the nanoclay causes transformation in the polymer chain conformations resulting in an increase of the proportion of the segments with helical conformation. Besides, the influence of the clay on the phase transformations of the polymeric matrix during stretching, relaxation from the applied stress and heating are also considered. It is observed that the presence of the nanoclay alters the behavior of the polymer in comparison with the behavior of pure sPP. Therefore, we can support that the polymeric matrix exhibits modified structure, which means that these composite materials are new materials with different properties from sPP. Finally, the impact of clay during the exposure of these materials at UV-c radiation is investigated. It is discovered that the presence the clay affects the mechanism of the photooxidative degradation of sPP, while the carbonyl groups formed due to the oxidation interact with the polar groups contained in the clay. This observation can be assumed to be an effective way to improve the adhesion between the polymer and the inorganic filler. Finally, at the end of this study, some results about a second system of nanocomposites are presented. A compatibilizer was added in these materials in order to increase the polarity of the polymeric matrix and as a result to improve the adhesion between the clay and the polymer. iPP-g-MA was used as compatibilizer, however due to the fact of the superposition of the infrared bands of iPP with the bands of sPP it is impossible to have results about the impact of the compatibilizer on the polymer structure using infrared spectroscopy. Through wide and small angle X-ray scattering measurements (WAXS and SAXS) it is found that in these materials the clay is exfoliated.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2006

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kandilioti, Georgia
  • Κανδυλιώτη, Γεωργία

Subjects

dc:subject × 16

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/14119

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kandilioti, Georgia; Κανδυλιώτη, Γεωργία. Φασματοσκοπικός χαρακτηρισμός άμορφων και ημικρυσταλλικών πουλυμερών και νανοσύνθετων υλικών υπό την επίδραση μηχανικών, θερμικών και φωτοοξειδωτικών κατεργασιών. University of Patras, 2006. http://hdl.handle.net/10442/hedi/14119