Aristotle University Of Thessaloniki (AUTH)
Μελέτη της δομής και της δραστικότητας νέων καταλυτικών υλικών στην οξειδωτική αφυδρογόνωση του προπανίου
Abstract
dc:descriptionThe global demand for propylene is increasing rapidly, thus, there is a great need for the development of new technologies to handle this situation. Propylene is produced today from FCC and naphtha steam cracking, as byproduct, whereas from propane dehydrogenation as main product. Using cheap and abundant alkanes as feedstock to produce light olefins is state of the art. Oxidative dehydrogenation of propane is an attractive and alternative route for propylene production, which overcomes the drawbacks of the processes used nowadays. The common goal of the research groups and industries who study the selective oxidation of propane, is to find the optimum catalyst which maximizes propylene yield suppressing the undesirable oxidation reactions to carbon oxides. In the present PhD thesis, the oxidative dehydrogenation of propane was investigated and the aim was to develop novel catalytic materials in order to achieve high propylene productivity. The effect of the nature of active metal and of the support was explored. The study was focused on supported vanadia catalysts because they were found to be very active in the oxidative dehydrogenation reaction. Dispersion of vanadia on titania resulted in high propane conversion at relative low temperatures, whereas the selectivity to desired olefin remained at low levels. The relationship between surface structure and catalytic activity was established. It was proved that the nature of the support is of great importance, since it was found that the oxygen bond between the active metal and the support is one of the determining factors that influence the catalytic activity. The presence of additives, as well as the preparation method plays an important role on the catalytic activity. In particular, the propylene selectivity over the vanadia on titania catalyst was significantly improved by addition of magnesium oxide. Various preparation methods were used (wet impregnation, sol-gel, EDF, grafting) in order to achieve even higher selectivity. The sequence of magnesia addition, as well as the percentage of magnesia affected only the activity of the catalysts. Propane conversion decreased with the amount of magnesium oxide, whereas the selectivity to propylene remained unaffected and remains at high levels. The physicochemical characteristics of the catalysts were investigated by means of various techniques, which give important information for the bulk and surface structure of the materials. There is a strong correlation between the catalytic activity and the acidity of the oxide surface, more precisely the number of the weak acid sites. The higher the amount of weak acid sites, the higher is the activity. Pretreatment conditions play a significant role in catalytic behavior. Exposure of the catalyst in reductive environment prior to reactive conditions resulted in a remarkable increase of selectivity to propylene. In conclusion, the catalyst consisted of 5%wt. V2O5 and 1.9%wt. MgO supported on TiO2, which was prepared by sequential deposition of the oxides with intermediate calcination, presented the best performance in the selective oxidation of propane among all the samples that were prepared. The productivity of the catalyst is one of the highest ever reported in literature and equals 2.2kg/kg catalyst/h. The reaction was successfully performed over the optimum catalyst using fluidized bed reactor, as well as at cyclic conditions, where propane and oxygen where fed periodically. However, these efforts did not result in any improvement in propylene selectivity. The reaction mechanism was explored via transient experiments in a TAP reactor. In particular, the role of lattice oxygen and gas phase oxygen in the oxidative dehydrogenation reaction was investigated. Reaction occurs via Mars -van Krevelen redox mechanism with the exclusive participation of VOx surface species to the formation of the desired and undesired products, whereas the role of oxygen of the gas phase is only limited to reoxidation of the reduced catalyst. A simplified model consisting of 7 gas-solid reactions reactions reproduced satisfactorily the observed catalytic behavior. Homogeneous oxidative dehydrogenation reaction in the gas phase, at elevated temperatures, was also successfully predicted by a mechanistic model consisting of 73 chain radical reactions. The model can be a useful tool for the industrial application of the process, for catalytic system which are active at higher temperatures and when heterogeneous-homogeneous reactions take place.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2006
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Machli, Maria
- Μάχλη, Μαρία
Subjects
dc:subject × 20- Οξειδωτική αφυδρογόνωση
- Προπάνιο
- Καταλύτες
- Προπυλένιο
- Οξείδιο του βαναδίου
- Οξείδιο του μαγνησίου
- Πετροχημικά προϊόντα
- Τιτάνια
- Oxidative dehydrogenation
- Propane
- Catalysts
- Vanadium oxide
- Magnesium oxide
- Propylene
- Petrochemicals
- Titania
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/14172