Back to search

Aristotle University Of Thessaloniki (AUTH)

Μελέτη εκχύλισης με μεμβράνες

Abstract

dc:description

The present thesis aims at studying the liquid - liquid membrane - based solvent extraction and consists of the understanding of the mass transfer mechanism, the process design and the development of criteria for the performance optimization upon the selection of the operating conditions. In order to study mass transfer in membrane modules, the following case is considered: parallel flow through a bundle of hollow fibers with simultaneous solute diffusion from an aqueous feed phase (flowing in the shell side) to an organic solvent (flowing in the fiber lumen). The study is focused on the shell side mass transfer and in particular on the effect of the fiber packing fraction, φ. For the class of problems considered here, i.e. liquid systems characterized by sufficiently large Schmidt numbers, Sc, a laminar flow boundary layer solution is obtained for the mass transfer rate to the outer fiber surface. To assess the aforementioned closed - form equation, two model flow fields are considered: flow along a single fiber, placed symmetrically in a tube (Model I) and flow along hypothetical annular elements or cells (each one surrounding a fiber) (Model II). According to this analysis (for the shell side), the Sherwood number, Shw, dependence on Reynolds number, Rew, and on fiber packing fraction, φ, is derived. By combining the closed - form equation for the shell side mass transfer with known expressions for the diffusion through the membrane pores as well as for the lumen side mass transfer, a predictive model is obtained for the solute concentrations at both exit streams (aqueous and organic phases), depending on several physico - chemical parameters.The experimental part consists of the mass transfer study of a solute (benzaldehyde or hexanal) from a diluted aqueous feed phase (solute concentration 100 μl lt -1) to the organic solvent n-hexane. These physico - chemical systems are described by relatively large partition coefficients. For experimentation, four membrane modules are constructed comprised of a bundle of hydrophobic polypropylene hollow fibers with packing densities ranging from 0.093 to 0.402. Data are collected in a great range of Reynolds number in the shell side, Rew, and in fiber lumen, Reo, by feeding the fluids in a co - current or counter - current mode. To further assess, two criteria are used to retain experimental data for the determination of mass transfer coefficient, kw,exp. The experimental data are in good agreement with theoretical predictions with no recourse to adjustable parameters or empirical coefficients. According to this comparison, the Sherwood number, Shw, dependence on the Reynolds number, Rew, to the 1/3 power is confirmed, for the range of the packing density, φ, tested. The effect of φ on shell side mass transfer (if any) is considered to be very weak and in all probability it is well within the narrow range of uncertainty due to experimental inaccuracies. Hence, a shell side mass transfer correlation is recommended, covering the range of packing density with practical interest 0.05 < φ < 0.45. Moreover, the analytical expressions developed in this thesis for the prediction of exit solute concentrations in membrane - based solvent extraction are in very good agreement with the experimental data. Taking advantage of the ability of mass transfer prediction in membrane modules, basic issues involved in designing membrane - based extraction process are evaluated in the present thesis. The main objectives of liquid - liquid extraction operations (i.e. maximization of solute recovery and of solvent saturation of the solute) serve as the basis of this analysis. Firstly, the operating characteristics of a single membrane module (comprised of a bundle of parallel fibers) are analyzed and two parameters are shown to determine process performance: the extraction factor E (reflecting thermodynamic limitations) and a lumped parameter A which takes into account the geometrical features of the module as well as kinetic and thermodynamic limitations. According to the present analysis, a narrow range of E and A seems to lead to near optimum module performance and thus, a procedure for preliminary design and module selection are recommended. The relative significance and inter - relation of geometric and operating variables are also appraised and, in the form of dimensionless quantities, closed - form expressions of general validity are developed for a variety of continuous process options (single module, counter - current and “cross - flow” arrays).

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2006

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Asimakopoulou, Akrivi
  • Ασημακοπούλου, Ακριβή

Subjects

dc:subject × 22

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/14173

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Asimakopoulou, Akrivi; Ασημακοπούλου, Ακριβή. Μελέτη εκχύλισης με μεμβράνες. Aristotle University Of Thessaloniki (AUTH), 2006. http://hdl.handle.net/10442/hedi/14173