University of Patras
Επιφανειακές κατεργασίες μετάλλων με χρήση στερεάς και ρευστοστερεάς κλίνης
Abstract
dc:descriptionIn the present study, a theoretical and experimental investigation of a metal surface treatment technology, the Chemical Vapour Deposition with use of a Pack Bed (PBCVD) and a Fluidised Bed (FBCVD), has been examined. The adequate protection of the metals surfaces is achieved by deposition of coatings which provide corrosion protection. Four main areas of surface treatments of metals have been studied: I. Aluminide coating formation on substrates of Ni, Fe, Fe-15Cr with use of the high temperature Fluidised Bed Chemical Vapour Deposition (FBCVD). II. Aluminide corrosion protective coatings on substrates of Ni, Fe, Inconel 738, NiCr23Fe and SS 304, with use of the low temperature Fluidised bed Chemical Vapour Deposition (FBCVD). III. Multielement corrosion protective coating formation on substrates of Ni and Fe with use of the one-step, high temperature Pack Bed Chemical Vapour Deposition (PBCVD), leading to Al-Cr-Hf/Y coatings. With use of the one-step, high temperature Fluidised Bed Chemical Vapour Deposition (FBCVD) leading to Al-Cr coatings, as well as with use of the two-step low-high temperature Fluidised Bed Chemical Vapour Deposition (FBCVD) process, leading to Al-Cr coatings. IV. Aluminide coatings on substrates of Mg and Mg alloys with use of the Pack bed Chemical Vapour Deposition (PBCVD) and Fluidised Bed (FB), as well as with immersion in aluminium suspension (slurry process). The theoretical investigation has shown that all of these fermentations can lead to coating formation that provides corrosion protection. The experimental results have shown that the formation of such coatings with the used methods is capable. The experimental weaknesses have been appointed, as well as the confines of these processes. Finally, the formed coatings have been evaluated, according to their characteristics, such as the substrate-coating adherence, the coating thickness, the uniformity, chemical composition, hardness, roughness and behavior in corrosive environments. Mathematical models have been proposed, based on the theoretical and experimental results. These models permit the prediction of the coating development, according to the experimental conditions. The predictions are in satisfactory agreement with the herein presented experimental results, also with these of other researchers.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2004
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Christoglou, Christos
- Χριστόγλου, Χρήστος
Subjects
dc:subject × 20- Επιφανειακές κατεργασίες
- Στερεά κλίνη
- Ρευστοστερεά κλίνη
- Αντιδιαβρωτικά επιστρώματα
- Αεριοτουρμπίνες
- Επιφανειακή προστασία μετάλλων
- Χημική εναπόθεση ατμών
- Επιστρώματα διάχυσης
- Surface treatment
- Packed bed
- Fluidized bed
- Corrosion resistant coatings
- Gas turbines
- Metal surface protection
- Chemical vapour deposition
- Diffusion coatings
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/14186