Back to search

University of Patras

Διεπιφανειακή μελέτη υπέρλεπτων μεταλλικών υμενίων νικελίου και οξειδίου του νικελίου σε επιφάνειες αλουμίνας και σταθεροποιημένης με ύττρια ζιρκονίας

Abstract

dc:description

Metal-ceramic systems have many technological applications in composite materials, microelectronics, as well as in heterogeneous catalysis. During the last decades, metal-ceramic interfaces have been extensively studied under ultrahigh vacuum conditions with surface-sensitive techniques. In this study, the interaction of nickel and nickel oxide ultrathin films with different oxide surfaces upon heating in ultrahigh vacuum (UHV) was examined. Specifically, yttria stabilized zirconia (9% mol Y2O3, YSZ) and α-alumina monocrystalline surfaces, as well as polycrystalline γ-alumina films developed on aluminum foil were studied. The main emphasis was on the influence of the oxide’s surface treatment on the behavior of nickel and nickel oxide ultrathin films upon heating. Moreover, the influence of γ -alumina film thickness on the initial stages of nickel growth and the behavior of submonolayer nickel films upon heating were investigated. The experiments were performed in an ultrahigh vacuum system equipped with the surface sensitive techniques: X-Ray Photoelectron Spectroscopy (XPS) and X-Ray-induced Auger Electron Spectroscopy (XAES). The first part of this study covered the interaction of ultrathin nickel films with YSZ surfaces, in relation to YSZ surface treatment and nickel coverage, upon heating in UHV in the temperature range 400-850K. In addition, the thermal stability of nickel oxide films in relation to the surface treatment was studied. It was found that, upon heating the Ni/YSZ system at 480-850K, nickel was oxidized via the substrate mobile oxygen ions excess and the rate of oxidation depended strongly on the state of the surface. Depending on how much the substrate treatment reduces the oxygen excess in both the bulk and the surface, the substrate-induced oxidation rate is reduced accordingly. The Ni oxidation mechanism via the substrate is similar to that for gas phase oxidation. The state of the surface also influences the thermal stability of nickel oxide films. The reduction of the substrate oxygen excess leads to a significant decrease of the NiO decomposition temperature, which is expected to be higher than 900 K in our UHV chamber. The oxidation capability of the YSZ crystal is completely restored after heating at high temperatures in an oxygen atmosphere. The second part of this study examined the behavior of ultrathin nickel films on pristine and modified single-crystal α-Al2O3 surfaces upon heating at 600-900K. It was found that the nickel/α-Al2O3 interaction strongly depended on the chemical state of the surface, namely on the presence of carbon, hydroxyl groups and non-lattice oxygen. These impurities / defects may appear due to the sample exposure to the atmosphere prior to introduction in the UHV chamber and may also be created or modified via surface treatment outside and within the UHV chamber (ex-situ oxygen plasma treatment, in-situ Ar+ sputtering, heating in UHV or in the presence of oxygen). The interaction between deposited nickel and surface defects can lead to nickel coalescence, partial oxidation and/or a NiAlxOy chemical compound formation. The microstructure and chemical state of the surface also affect the thermal stability of nickel oxide ultrathin films, as the presence of carbon and NiAlxOy can deactivate or bind the surface oxygen. As a result, the nickel oxide decomposes to metallic nickel at lower temperature, compared with the estimated thermodynamic stability limit for NiO in the UHV chamber (above 900K). On pristine, pure α-Al2O3 surfaces (without the presence of carbon but with the presence of hydroxyls groups) the nickel oxide is stable up to 900K. The last part of this study involved the interfacial interaction of submonolayer nickel films with γ-Al2O3/Al surfaces in the very early stages of growth and upon subsequent heating up to 790K, studied as a function of the γ-Al2O3 film thickness. Upon submonolayer nickel film growth and subsequent heating up to 600K, the reduction of the alumina film thickness leads on the one hand to a decrease of the tendency of surface hydroxyl groups to oxidize nickel and on the other hand to an increased formation of a NiAlx intermetallic compound. The NiAlx is formed as a result of nickel diffusion towards the aluminium substrate. This diffusion takes place due to the existence of microholes in the alumina film. Upon heating up to 790K, the initially formed NiO decomposes to metallic Ni, whereas the Ni of the NiAlx intermetallic compound diffuses inside the metallic aluminium. In all cases, metallic nickel remains on the γ-alumina surface.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2005

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Sygellou, Lamprini
  • Σύγκελλου, Λαμπρινή

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/14188

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Sygellou, Lamprini; Σύγκελλου, Λαμπρινή. Διεπιφανειακή μελέτη υπέρλεπτων μεταλλικών υμενίων νικελίου και οξειδίου του νικελίου σε επιφάνειες αλουμίνας και σταθεροποιημένης με ύττρια ζιρκονίας. University of Patras, 2005. http://hdl.handle.net/10442/hedi/14188