Back to search

University of Patras

Προηγμένοι αντιδραστήρες μερικής οξείδωσης του μεθανίου προς αέριο σύνθεσης

Abstract

dc:description

The conversion of natural gas to synthesis gas is a very important process because synthesis gas is necessary for the Fischer-Tropsch synthesis and also for the production of methanol. The most common process for producing synthesis gas from natural gas is the steam reforming of methane, since methane is the main component of natural gas. Recently, a significant amount of effort has been directed to processes alternative to steam reforming of methane such as CO2 reforming, catalytic and not catalytic partial oxidation of methane, e.t.c. Among the above mentioned processes partial oxidation of methane seems to be the most attractive alternative to steam reforming of methane for converting natural gas to synthesis gas, owing to a number of advantages. The most important among them are, the small amount of heat that is produced during the reaction compared to the heat that is produced during the combustion of methane to CO2 and H2O, and the ratio of the produced synthesis gas which is CO/H2 : ½ which is exactly the necessary ratio for the Fischer Tropsch and methanol synthesis. The catalytic partial oxidation of methane to synthesis gas has been studied using fixed bed reactors, mainly. Due το the disadvantages of this kind of reactors such as the development of hot spots during the combustion of methane and the high pressure drop, the study of partial oxidation of methane has been made in other kind of reactors such as fluidized bed reactors, honeycomb reactors, auto-thermal reactors, e.t.c. In the present study the catalytic partial oxidation of methane has been studied in a Heat Integrated Wall Reactor (HIWAR) and also in a monolithic reactor. The Heat Integrated Wall Reactor consists of a non-porous ceramic tube of high thermal conductivity in the inner and outer surface of which the catalytic film is deposited. The tube is enclosed in another tube, which can be ceramic or quartz. Because of the way of construction of the reactor the catalyst that is deposited in the inner surface of the ceramic tube can be different from the one that is deposited on the outer surface of the tube. The catalyst that was used for the study of the partial oxidation to synthesis gas in the Heat Integrated Wall Reactor was Rh/Al2O3. The factors the influence of which was studied here were the type of deposition of the catalyst film on the tube, the furnace temperature, the flow rate and the amount of catalyst that was deposited in the inner and outer surface of the tube. The experimental results indicated that there is an optimum amount of catalyst that can be deposited on the inner and outer surface of the reactor in order to obtain a flat temperature profile without the development of hot spots. The range of flow rates that can be used in the HIWAR is bigger than the range that can be used in a conventional reactor, due to the absence of hot spots. Some experimental results also indicated that part of CO is produced via the direct scheme. Partial oxidation of methane to synthesis gas had been studied in a monolithic reactor as well. The main advantages of monolithic reactors are the very low pressure drop and the high surface area. The catalyst that was used during this study was 0.5%Ru/TiO2 (1%CaO), which is a very active and stable catalyst for this reaction. During the experiments that took place in the monolithic reactor the factors the influence of which was studied here were the flow rate, the furnace temperature and the feed composition. The experimental results indicated that the combustion of methane takes place initially which is followed by the endothermic reforming reactions. The combustion of methane to CO2 and H2O is favored in low temperatures while the endothermic reforming reaction is favored in high temperatures. Methane conversion as well as CO and H2 selectivity change as the flow rate and furnace temperatures change. Experimental results indicated that a catalyst grain diameter less than 0,09 mm is necessary for the catalyst to be stable during the reaction. In order to predict the behavior of factors such as temperature, methane conversion and CO and H2 selectivity during the catalytic partial oxidation of methane in a monolithic reactor, a one-dimensional model was developed in order to simulate the monolithic reactor during the reaction. The calculations were based on the rate equations that were developed using experimental results for the 0,5%Ru/TiO2 (1%CaO). The influence of the initial temperature, initial pressure, flow rate and feed composition were studied. Comparison of the results of the simulations against those of the experimental studies indicated that calculations qualitatively predict the behavior of the reactor but not quantitatively, probably due to the assumptions that were introduced during the development of the model, i.e. one dimensionality of the model, uncertainties in the rate expressions etc. Relaxing some of those assumptions in order to approach the real operating conditions of the reactor is expected to enhance quantitative agreement between the experimental and numerical results.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2003

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Piga, Athina
  • Πίγκα, Αθηνά

Subjects

dc:subject × 14

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/14216

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Piga, Athina; Πίγκα, Αθηνά. Προηγμένοι αντιδραστήρες μερικής οξείδωσης του μεθανίου προς αέριο σύνθεσης. University of Patras, 2003. http://hdl.handle.net/10442/hedi/14216