Aristotle University Of Thessaloniki (AUTH)
Η επίδραση του είδους της θερμικής πηγής και του τύπου της μηχανής χύτευσης στην επιφανειακή πόρωση των αργυροπαλλαδιούχων κραμάτων: πειραματική μελέτη
Abstract
dc:descriptionThe present dissertation consists of two parts: an introductory general part and a research-specific one. The general part outlines an introduction to metals and alloys used in Dentistry. It describes - in brief - the structure, properties and biocompatibility of metals and alloys, and their field of application, together with the forms of common defects appearing in castings and their associated causes. Porosity and porosity control methods are also discussed in relevant sections. The aim of the study was to investigate the effects of casting processes on the development of porosity on Ag-Pd alloys for metal - acrylic restorations. An M.O.D. (mesial-occlusal-distal) type specimen was used in the research while three sets of six specimens for each alloy (Pangold, Palliak-M, Panag) were constructed using three different methods of melting and casting. Gas (propane) - oxygen and centrifugal casting machine, electrical oven and centrifugal casting machine and electrical oven - vacuum and press air were used to melt each alloy and cast the specimens. A stereo-microscope was used to scan the external porosity in conjunction with digital photography, in order to store imaging data. The surfaces of the specimens and the total area of the pores were measured using an image analysis program. Quantitative results from the conducted investigation have been analyzed using statistical methods, lending to the following conclusions: 1. There was no statistically significant difference in the total number of defects (pores) on the external surface of the specimens among the three groups of alloys treated by different melting and casting techniques. 2. There was no statistically significant difference in the total number of defects (pores) on the three surfaces of the specimens among the three groups of alloys treated by different melting and casting techniques, in correlation with different width and position of the specimen surface. 3. Silver-palladium alloys with Au in their composition exhibited smaller pore sizes among the groups of casts fabricated with different melting and casting techniques. 4. The increase of Au quantity in the composition of the alloy does not play a predominant role in the number or the size of the pores among the groups of casts fabricated with different melting and casting techniques. 5. Silver-palladium alloys without Au in their composition and fabricated with propane-oxygen melting technique with the aid of a centrifugal casting machine exhibited greater pore sizes compared to the groups of casting fabricated with the other melting and casting techniques.
Degree
thesis:*- Grantor dc:publisher
- Aristotle University Of Thessaloniki (AUTH)
- Year dc:date
- 2007
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Καλτσίδης, Γεώργιος
Subjects
dc:subject × 17- Αργυροπαλλαδιούχα κράματα
- Τεχνικές χύτευσης
- Σφάλματα χυτών
- Επιφανειακή πόρωση
- Μέγεθος πόρων
- Συνολική επιφάνεια πόρων
- Silver-palladium alloys
- Melting techniks
- Casting techniks
- Castings deffects
- Surface porosity
- Pore size
- Total pore area
- Ιατρική και Επιστήμες Υγείας
- Κλινική Ιατρική
- Medical and Health Sciences
- Clinical Medicine
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/14617