Back to search

Aristotle University Of Thessaloniki (AUTH)

Νέα εκλεκτική καταλυτική διεργασία παραγωγής αιθυλενίου

Abstract

dc:description

Ethylene constitutes the keystone of the petrochemical industry, since it is used for the production of numerous petrochemical products. With ethylene demands constantly rising and the general claim, in the frame of environment protection and preservation of non-renewable energy sources, for industry to convert to clean energetically-balanced processes, the development of an alternative process for the production of ethylene, to replace the high-cost, energy-consuming process of steam cracking, is becoming an increasingly urgent task. Catalytic oxidative dehydrogenation of ethane at low temperatures is an attractive alternative route for the production of ethylene, exhibiting particular economic and technological interest. Its major advantage, compared with the conventional method, is its high energy efficiency, since the process operates at low temperatures and involves an exothermic reaction, thus has considerably lower energy requirements. The use of ethane as feedstock greatly reduces the cost and conforms to the need for sustainable development, while the emission of greenhouse effect gasses, such as NOx and CO2, is minimal due to the low operating temperature (<500°C). The key for a viable industrial application of this process is the development of a highly active and selective catalytic material, able to activate and convert the relatively inert alkane to olefin at low temperature and minimize the parallel and consecutive side reactions of both the alkane and alkene to carbon oxides, which was the major objective of this thesis. Several catalytic systems, highly efficient for the production of ethylene via ethane oxidative dehydrogenation, were developed and investigated, while mechanistic and kinetic studies, as well as detailed investigation of the structural and physicochemical properties of the materials with respect to their catalytic performance, led to fundamental insight in the mechanistic pathway of the catalytic reaction and the nature of the active and selective sites. The main part of the research was focused on two types of catalytic materials: catalysts based on molybdenum oxide and catalysts based on nickel oxide. Supported MoO3 catalysts constitute an active and very selective class of catalytic materials for the ethane oxidative dehydrogenation reaction, operating at a temperature range of 450-600°C. The molybdena loading and the type of support were recognized as two crucial parameters, significantly affecting both the structure and the catalytic behavior of the materials. Amorphous, two-dimensional MoOx species, highly dispersed on the catalytic surface, constitute the active and selective reaction sites. Optimum catalytic performance (maximum ethylene yield) was obtained for the catalyst containing 20%wt. MoO3/Al2O3, a loading that corresponds to complete theoretical monolayer coverage of the support surface by MoOx species. The Mo-O-support bond was found to be the kinetically relevant bond, with direct involvement in the rate-determining step of the reaction, which is the activation of the ethane C-H bonds. Mechanistic studies by means of in situ IR spectroscopy and temperature-programmed reaction technique showed that the reaction occurs via a redox Mars and van Krevelen type mechanism with the participation of lattice oxygen, while the activation of the C-H bonds proceeds through the formation of unstable surface alkoxides, which are rapidly dehydrated to ethene via β-H abstraction or are further oxidized to acetaldehyde and ultimately COx. The relative rate between these two competitive pathways, which determines the selectivity to the desired product, depends on the acid strength of the material, since ethylene was found to be strongly adsorbed on catalysts with strong acid sites and further oxidized to COx.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2005

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Heracleous, Eleni
  • Ηρακλέους, Ελένη

Subjects

dc:subject × 18

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/14816

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Heracleous, Eleni; Ηρακλέους, Ελένη. Νέα εκλεκτική καταλυτική διεργασία παραγωγής αιθυλενίου. Aristotle University Of Thessaloniki (AUTH), 2005. http://hdl.handle.net/10442/hedi/14816