Back to search

Aristotle University Of Thessaloniki (AUTH)

Σύνθεση NH3 σε ατμοσφαιρική πίεση

Abstract

dc:description

In the present thesis the study of decomposition and synthesis of NH3 was performed with the use of solid electrolyte proton conducting cells, in order to enhance the catalytic rate of the reactions. All experiments were under atmospheric pressure conducted. Α technoeconomical approach for the industrial synthesis of NH3 was conducted, based on bibliographic data and other studies. The study of NH3 decomposition was in a proton conducting cell, in the form Fe/SrZr0.95Y0.05O3-a/Ag, performed. The effect of gas composition, temperature and of the imposed current on the catalytic rate was studied. Positive potentials were imposed to the cell and electrochemical promotion (NEMCA) was observed, at lower temperature examined. In most cases of the experiments, the cell operation was faradaic. Also, intervallic potentials were imposed with frequencies between 0.5, 1.0, 5, and 10 Hz. This potentials led to a decrease of the catalytic rate of ammonia decomposition. The catalytic and electrocatalytic ammonia synthesis was studied in a single chamber cell using the La1.0Fe0.7Ni0.3Ox catalyst. Catalytic and electrocatalytic experiments were performed at temperatures in the range of 400-1000 οC. The highest rate value was obtained for 50% Ν2, 50% Η2 και 10% Ν2, 90% Η2, whereas the experimental rates corresponded to the 10-90% of the thermodynamically predicted ones. For the electrocatalytic experiments, a SCY electrolyte was used. Hydrogen was supplied in the form of Η+ from the anodeγινόταν (Pd) to the cathode through the SCY cell. By applying a constant voltage to the cell, the electrocatalytic was higher than the corresponding rate at 550 and 600 οC, but at higher temperatures the difference between the two rates wasn’t important. The catalytic and electrocatalytic synthesis of ammonia was studied in double-chamber and single-chamber proton conducting cells at 450-700°C and at atmospheric total pressure. A Fe-based industrial catalyst was used as the working electrode. The kinetics of the catalytic reaction of ammonia synthesis were evaluated under open circuit. An up to 80% increase in the reaction rate was observed when protons were electrochemically “pumped” to the Fe electrode. A weak NEMCA effect was observed with the Faradaic efficiency (Λ) and the reaction rate enhancement (ρ) remaining below 3.5 and 2.0, respectively. In summary, the catalytic activity of an industrial ammonia synthesis catalyst can be electrochemically promoted, although the observed NEMCA effect was relatively mild.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2007

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Ουζουνίδου, Μάρθα
  • Ouzounidou, Martha

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/15208

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Ουζουνίδου, Μάρθα; Ouzounidou, Martha. Σύνθεση NH3 σε ατμοσφαιρική πίεση. Aristotle University Of Thessaloniki (AUTH), 2007. http://hdl.handle.net/10442/hedi/15208