Back to search

Aristotle University Of Thessaloniki (AUTH)

Ηλεκτροχημική απομάκρυνση νιτρικών από υδατικά διαλύματα και περιβαλλοντικά δείγματα με χρήση σταθερού και παλλόμενου δυναμικού

Abstract

dc:description

The electrochemical removal of nitrate from aqueous solutions and environmental samples such as simulated low level nuclear wastes was studied under constant and pulsing potential electrolysis. Preliminary experiments, under constant potential, showed that the efficient reduction of nitrate towards nitrogen gas can be achieved on metal electrodes of high hydrogen evolution overpotential, such as Sn, Pb, Al as well as on the alloy Sn85Cu15 at extremely high cathodic overpotentials. The main products in all cases were NO2 -, NH3 and N2. Small amounts N2O and traces of NO2 and NO were also detected. The kinetic analysis of the experimental results indicated that the reduction of nitrate follows a consecutive reaction mechanism according to the scheme: NO3 - ??k1>NO2 - ??k2 > NH3 2NO2 - ??k3> N2 The electrolytic experiments showed that at potential -2.0 V vs. Ag/AgCl on Sn85Cu15 electrode, the selectivity (%S) of nitrogen was 35%. Tin at high cathodic potentials(-2,9 V) was proved to be the most effective electrocatalyst for the reduction of nitrate, since both the rate of reduction (0.206 mmol min?1 cm?2) and the selectivity of nitrogen (92%) were the highest reported in the literature so far. As the cathodic potential increases, the %S of nitrogen increases, while that of ammonia displays a maximum at ?2.4 V. The %S of nitrite decreases from 65% at ?1.8V to < 0.02% at potentials more negative than ?2.4 V, which is lower than its maximum contaminant level. The rate of reduction of nitrate increased with the increase of the cathodic potential, even at extremely high values of cathodic potentials. Given that the specific adsorption of the anions on the electrode surface at cathodic potentials more negative than -1.8 V is impossible, it was proposed that the reduction of nitrate takes place at a large distance from the electrode surface, possibly outside the outer Helmholtz plane, where the nitrate anions forms ion pairs with the cations of the supporting electrolyte, which then are not repelled by the negatively charged electrode. Taking into account the electrolytic experiments, the voltammetric behavior of nitrate and the general literature on the reduction of anions, it was proposed that the transfer of electron from the electrode surface to the nitrate anion takes place either by bridge transition or through electron tunneling. At simulated low level nuclear wastes containing 1.8 Μ NaNO3 + 0.55 M NaNO2 + 0.55 M NaOH after an electrolysis time of 240 min the %removal efficiency of nitrate and nitrite was 96% and 94% respectively, the %S of N2 85.2% and the current efficiency (%CE) about 80%.The cathodic corrosion of the tin cathode seems to be the most serious problem of the whole process, since the concentration of tin in the final solution is higher than the environmentally acceptable level. This problem could be treated further by applying a less negative potential after the removal of nitrate, in order to redeposit the dissolved tin or by the addition in the initial solution small amounts of some cations, such as caesium, rubidium or ammonium which according to the bibliography can stop the corrosion at current densities up to 2,7 A/cm2. The electrochemical reduction of nitrate under pulsing potential electrolysis was studied for the first time in this thesis. Symmetrical square wave, asymmetrical square wave, triangular and sinusoidal pulses as well as direct AC net current were used. It was proved that the asymmetrical square wave pulses having retention time at the cathodic and the anodic limit the 80% and the 20% of the period of the pulse respectively was the more efficient for the removal of nitrate. The rate of the reduction and the selectivity of the products are also affected by the kind of the electrode, the positive and the negative front of the pulse and the frequency. Cu60Zn40 electrode gave the highest removal efficiency of the nitrate in the frequency region 30-50 Hz, while the selectivity of nitrogen reached 80%. The corrosion of the Cu60Zn40 electrode, in this frequency region, was negligible.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2007

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Πολατίδης, Χρήστος
  • Polatides, Christos

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/15209

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Πολατίδης, Χρήστος; Polatides, Christos. Ηλεκτροχημική απομάκρυνση νιτρικών από υδατικά διαλύματα και περιβαλλοντικά δείγματα με χρήση σταθερού και παλλόμενου δυναμικού. Aristotle University Of Thessaloniki (AUTH), 2007. http://hdl.handle.net/10442/hedi/15209