Back to search

Aristotle University Of Thessaloniki (AUTH)

Πορώδεις κεραμικές μεμβράνες για διεργασίες διαχωρισμού

Abstract

dc:description

The synthesis, characterization and the separation properties of mesoporous γ-Al2O3 (pore size 3-5 nm) and microporous SiO2 (pore size < 1nm) ceramic membranes (primary or modified) are described in this Thesis. A survey of the state of the art of polymeric and inorganic membranes for the propane-propylene separation is given in Chapter 1. A second class of separations that attract much of the scientific interest are hydrogen separations. The most important results for hydrogen separation with emphasis on the separation of hydrogen from carbon dioxide using porous ceramic membranes are mentioned. At end of the 1st Chapter a short description of the filtration process using membrane technology is done while the most important applications of the above process are presented. In Chapter 2 the experimental procedures for the synthesis and the characterization of the membranes are described in detail. Moreover a description of the apparatus that are used for gas separation applications and filtration using membrane technology is given. Mesoporous γ-Al2O3 membranes are developed in the inner side of asymmetric a-Al2O3 supports via the slip-casting technique by a nanocolloidal boehmite sol. After the deposition it follows drying and controlled heating at 600?C to form the final microstructure. Unsupported γ-Al2O3 membranes were characterized with N2 adsorption-desorption isotherms. The mean pore size of the membranes is 3-5 nm with a BET specific surface area of about 250-260 m2/gr, a porosity of 50% and a tortuosity of 5.5-6.5. Supported γ-Al2O3 membranes were characterized by gas permeability measurements. Knudsen diffusion and capillary condensation mechanism are the dominant transport mechanisms for non-condensable and condensable gases correspondingly confirming the defect free character of the membranes. The excellent agreement between the experimental permeabilities and the predicted permeabilities, assuming that boehmite particles are disc shaped resulting in card-pack structure for γ-Al2O3 membranes with slit-shaped pores, verify the above model for the membrane structure. Microporous SiO2 membranes are developed on the surface of γ-Al2O3 membranes using sol-gel method by a polymeric silica sol. This sol contains cores of silica with a size of 2-3 nm according with HR-TEM measurements. After the deposition of the membranes it follows drying and controlled heating at 400?C to form the final microstructure. Nitrogen adsorption/desorption isotherms for SiO2 material is type I characteristic for microporous materials with a pore size smaller than 2 nm. The BET specific surface area of the samples is 480-490 m2/gr with a porosity of 30%. The permeability of the SiO2 membranes for He is 2·10-10 mole·m-1·Pa-1·s-1 almost 15 times smaller compared with that for the mesoporous γ-Al2O3 membranes. Permeability of condensable gases is not characterized by capillary condensation maximum but increases with the mean pressure indicative of surface diffusion in the micropores.

Degree

thesis:*
Grantor dc:publisher
Aristotle University Of Thessaloniki (AUTH)
Year dc:date
2006

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Στοΐτσας, Κωνσταντίνος
  • Stoitsas, Konstantinos

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/15291

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Στοΐτσας, Κωνσταντίνος; Stoitsas, Konstantinos. Πορώδεις κεραμικές μεμβράνες για διεργασίες διαχωρισμού. Aristotle University Of Thessaloniki (AUTH), 2006. http://hdl.handle.net/10442/hedi/15291