National Technical University of Athens (NTUA)
Αλλοθερμική αεριοποίηση στερεών καυσίμων
Abstract
dc:descriptionThe subject of this Doctoral Thesis is the investigation of the chemical conversion (gasification) for Greek solid fuels, with typical example the lignite, under mild temperature and pressure conditions, by using the inherent moisture content as gasification medium and applying the least possible feed pretreatment. This goal is highly significant, since solid fuels gasification is being widely considered as the process that will play a key role in electric power production via either the operation of Integrated Gasification Combined Cycle (IGCC) systems or Fuel Cells plants. Both systems guarantee high energy conversion efficiencies and an effective confrontation of the environmental issues that accompany the use of solid fuels. Industrial scale Koppers-Totzek gasifiers were employed successfully for the gasification of Greek lignite aiming at the production of synthesis gas. The latter gasifiers operate under high temperature (1100-1500°C) and demand an extensive and expensive pretreatment (e.g., drying and pulverization) of the solid fuel. It has to be mentioned that the gasification of Greek lignite in Lurgi gasifiers is not considered being a proven process. In the context of the present dissertation, a solid fuel gasification pilot plant of continuous flow was designed, constructed and operated. This plant has the capacity of processing lignite with a nominal mass flow rate of 10 kg raw solids /h. This installation includes the gasifier and the gas product treatment units. The gasifier is a rotary kiln type reactor, indirect heat (electrical) and supplied with lifting flights for the effective mixing of the reactants. This type of gasifier allows the processing of lignite feeds with broad particle distribution (e.g. dp<15mm). The residence time of solids is adjusted through the kiln slope and the rate of revolution. The prospective product is synthesis gas of medium heating value, i.e. 12-14 MJ/Nm3. This gasifier bears three series of thermocouples for the measurement of axial temperature distributions: (i) inside the kiln and along its axis, (ii) near the electric resistances and (iii) at the outer surface of the ceramic insulation. A proper automatic control system (Programmable Logical Controller (PLC) interfaced with a PC) provides for the kiln temperature control, while the real time acquisition and recording in the PC of temperature and pressure data is accomplished with the aid of electronic interface cards. Downstream the kiln is installed a pilot unit for the delivery, cooling, cleaning, storing and combustion of the gas product. This installation includes an automatic control system for gas product pressure and flow rate control, which employs an electronic Proportional-Integral-Differential (PID) Controller, as well as a properly connected pneumatic control valve.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2004
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Χατζηλυμπέρης, Κωνσταντίνος
- Hatzilyberis, Konstantinos
Subjects
dc:subject × 20- Αλλοθερμική αεριοποίηση
- Στερεά καύσιμα
- Περιστροφικός κλίβανος
- Αεριογόνα
- Υδρο-πυρόλυση
- Αλλοθερμική ξήρανση
- Κίνηση στερεών
- Ανυψωτικά πτερύγια
- Allothermal gasification
- Solid fuels
- Rotary kiln
- Gasifier
- Hydro-pyrolysis
- Allothermal drying
- Solids motion
- Lifting flights
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/16186