National Technical University of Athens (NTUA)
Έλεγχος μηχανισμού Stewart με υδραυλικές οδηγήσεις βασισμένος στη δυναμική
Abstract
dc:descriptionIn this PhD thesis, dynamics, optimization and control for electrohydraulic servos is studied. The thesis is focused on the Stewart servomechanism, i.e. a six degrees-offreedom (dof) closed kinematic chain mechanism consisting of a fixed base and a movable platform with six linear actuators supporting it. The theoretical approach is surveyed via experiments to a real single dof servomechanism. The purpose of the thesis is the development of model-based control schemes for electrohydraulic servos and especially for the six dof Stewart platform mechanism. Therefore, the accurate knowledge of model dynamics is required. The structure of Stewart mechanism is described and the kinematics and differential kinematics (direct and inverse kinematics) are studied. Rigid body equations of motion are employed and described by a matrix form. Further, hydraulic dynamics of Stewart platform servomechanism are employed, including friction, and servovalve leakages. The whole system is described by a set of integrated statespace equations. The mechanism is achieved using the proposed optimization methodology. Three different nonlinear model-based control schemes are examined; these are the position tracking control, the impedance control and the joint-space control. The developed feedback controllers use the system dynamic and hydraulic model to yield servovalve currents, in analytical form, so that the error dynamics converge asymptotically to zero, independent of load variations. The control schemes are compared with a PD controller. Simulations with typical desired trajectory inputs are presented and a good performance of the controllers is obtained. The robustness of the controllers is demonstrated via examples. The Stewart mechanism electrohydraulic component selection is based on a novel optimization methodology for high performance servohydraulic robotic tasks. Further, the modeling, identification and control of a real single dof electrohydraulic servomechanism are studied. Full kinematic analysis is studied, and rigid body equation of motion and hydraulic dynamics are described by a set of integrated state-space equations, including friction, and servovalve leakages. Simulations with typical desired trajectory inputs are presented and a good performance of the controllers is obtained. Identification procedures employed in estimating the physical parameters of the experimental single dof servomechanism are discussed. The appropriate control scheme is selected and implemented by QNX real-time operating system on the 1-dof experimental electrohydraulic servosystem, and a good performance of the controller is obtained. The controller is compared with a PD controller.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2007
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Davliakos, Ioannis
- Νταβλιάκος, Ιωάννης
Subjects
dc:subject × 12Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/16196