National Technical University of Athens (NTUA)
Ανάπτυξη προηγμένων κεραμικών υψηλής πυριμαχικότητας και χαμηλής θερμικής διαστολής
Abstract
dc:descriptionFour new ceramic materials with high refractoriness were developed. The prepared materials are superior to the traditional used cordierite concerning their mechanical strength and their ultra low thermal expansion behavior. Two of these ceramics are composite materials consisting of aluminium titanate, Al2TiO5 (stabilized with Fe2O3) with 3Al2O3.2SiO2 (M) and (ZrO2)0.97(Y2O3)0.03. The third and fourth materials developed, are ceramics which belong to the NZP family. The interest in these materials is focused due to their near zero thermal expansion. In the present work the stabilizing effect of various iron oxide additions in Al2TiO5 phase stability was studied. It was found that Fe2O3 addition causes an increase on flexural strength and decrease on thermal expansion coefficient value (TEC). It was also found that the optimum amount of Fe2O3 addition for long time stay at critical decomposition temperature, is 20 mol%. Among the ceramics used as a second phase, 3Al2O3.2SiO2 found to improve flexural strength and at the same time it presents positive thermal expansion behavior. It is concluded that the optimum amount of 3Al2O3.2SiO2 addition at fully stabilized Al2TiO5 is between 30 - 50 wt% and the optimum addition of three stabilized zirconia at partially stabilized Al2TiO5 is 25 wt%. It was found that ceramic specimens sintered at temperatures between 1400 0C and 1450 0C present higher strength values (this conclusion is verified by the results obtained from Weibull statistical method) and TEC value near zero. The second system of ceramics studied is the NZP family. Two systems belonging to the NZP family were studied: Ca1-xBaxZr4P6O24 (CB) and Ba1+xZr4P6-2xSi2xO24 (BS). The general conclusion drawn from this study was that NZP ceramics can be designed to have controllable properties. The TEC values increase at higher substitution percentage (x), while the flexural strength - porosity values varries in a wide range. CB22 (for x=0.22) ceramic, presents the optimum properties. The disadvantage of these materials is their low chemical resistance when exposed to chemical attack, therefore, they can be used in many applications provided that they are not exposed at strong acidic-alkaline conditions. The members of BS system were thoroughly studied and it was found that they present controllable properties depending on the x value. Increase at x values results in materials with lower TEC values. At the same time porosity values are combined with high flexural strength. BS22 (for x=0.22) ceramic, presents the optimum properties. The BS ceramics can be used at high temperature applications even though they are exposed at strong acidic-alkaline conditions. Such conditions are prevailing in regeneration process of the ceramic substrate of catalytic converters. The BS ceramics were produced using an innovative technique. ΝΗ4-Η2ΡΟ4 was used as the source of phosphorous, resulting in materials with high porosity (>20%) and high mechanical strength (>10 MPa) without the addition of any porosity agent or sintering aid.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2006
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Oikonomou, Paraskevi
- Οικονόμου, Παρασκευή
Subjects
dc:subject × 20- Τιτανικό αλουμίνιο
- Κεραμικά NZP
- Χαμηλή θερμική διαστολή
- Κεραμικό υπόστρωμα
- Σταθεροποίηση φάσης
- Υψηλό πορώδες
- Κεραμικά υψηλής πυριμαχικότητας
- Σχεδιασμός υλικών
- Aluminium titanate
- NZP ceramics
- Low thermal expansion
- Ceramic substrates
- Phase stabilization
- High porosity
- High refractoriness
- Tailormade properties
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/16199