National Technical University of Athens (NTUA)
Καταλυτική υδρογόνωση βενζολίου σε αντιδραστήρες σταθερής κλίνης
Abstract
dc:descriptionThe scope of this Thesis was the study of benzene hydrogenation in a three-phase fixed bed reactor, the determination of the dominating phenomena and their effect to the whole process as well as the modeling of the operation of a similar industrial unit with a flexible simulator based on experimental data. The bed dilution technique with fine diluent is used to avoid catalyst partial wetting or liquid axial dispersion. The extracted kinetics is based on experiments with crushed catalyst, so as to ensure the absence of internal mass transfer phenomena. The last ones were studied well in a new bed with catalytic extrudates, from which catalyst’s tortuosity was defined. Furthermore, the effect of a larger size of diluent on reactor’s fluid dynamics and reactants’ external mass transfer was studied. Some conclusions were derived for the true activation energy of the reaction (~55kJ/mol), the external mass transfer coefficients of the reactants (exponential correlations with gas velocity), the reaction effectiveness factor (~0.3), the catalytic particle’s tortuosity (~3.7) and the concentration profiles of the reactants inside the catalyst (sharp decline of hydrogen concentration in the ? of the radius). Comparing the results with literature data it was clear that the external mass transfer coefficients were higher than those derived from literature correlations while the tortuosity was very close to the value extracted from stochastic model. By comparison between experiments conducted on downflow and upflow mode it was evident that at high gas velocities they produce the same yields, probably due to the equalization of the resistances in hydrogen mass transfer. Moreover, the operation of a naphtha de-aromatization industrial unit was simulated and optimized. Industrial data were collected from which over 100 steady states of unit’s operation. By conducting experiments with the same feed with that coming from industrial reactor’s inlet and by operating laboratory reactor at similar weighted hourly space velocities with the industrial one, the industrial reactor was simulated satisfactorily for a large range of operational conditions with a pseudo-homogeneous model. By associating the simulation results with calculations based on unit’s steady states regarding the energy and hydrogen mass balances, the deactivation of the second half of the catalytic bed was verified and attributed to its operation under hydrogen deficiency and with feed naphtha of high concentration in benzene. The catalyst deactivation was confirmed with laboratory experiments conducted with fresh catalyst. Finally, two ways of improving unit’s performance and increasing its productivity over 50% with simultaneous securing of catalyst’s high activity were proposed. The first is based on partial recirculation of the liquid feed, while the second on its freezing before reactor’s inlet and was applied with satisfactory results.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2006
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Metaxas, Konstantinos
- Μεταξάς, Κωνσταντίνος
Subjects
dc:subject × 18- Υδρογόνωση βενζολίου
- Αντιδραστήρες σταθερής κλίνης
- Κινητική
- Μεταφορά μάζας
- Διάχυση στους πόρους καταλύτη
- Αραίωση καταλυτικής κλίνης
- Προσομοίωση βιομηχανικών αντιδραστήρων
- Benzene hydrogenation
- Trickle-bed reactors
- Kinetics
- Mass transfer
- Diffusion in catalytic pores
- Catalytic bed dilution
- Industrial reactor simulations
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/16200