Abstract
dc:descriptionCalendering is a process used for the production of rolled sheets or films of specific thickness and final appearance, and involves the feed of a pair of co-rotating heated rolls (usually with radius to minimum gap ratio, R/H0 ? 100) with a material to form a sheet. The process is widely used in a variety of industries, such as plastics, rubber, food, aluminium, paper, etc. Many materials used in calendering are frequently non-Newtonian, exhibiting either pseudoplastic (viscosity dependant on shear rate) or viscoplastic (presence of a yield stress) rheological behaviour. The present Doctoral Thesis falls into the fields of computational rheology and rheometry, and in processing of materials, and aims at the full analysis and understanding of the process for the above rheologically complex materials. Experimental measurements were carried out for two pseudoplastic -viscoplastic materials which are widely used in the food industry, namely “mozzarella” cheese and bread dough. Rheological characterization experiments were conducted for both materials, followed by rolling experiments (R/H0 < 10). Regarding the rolling experiments, the response of final thickness and torque was studied with regard to changes in roll speed and initial thickness of the samples. Finally, a stable experimental window was determined for the rolling of both materials, based on device limitations and surface defects. With regard to the theoretical-computational part, the analysis of the process was first carried out using the Lubrication Approximation Theory (LAT) and the Herschel-Bulkley model of viscoplasticity. The mathematical modeling and the computer programs that were created, resulted in the solution of the problem for various non-Newtonian materials, which exhibit, or not, slip at the wall, as well as for the two cases of desired initial or final sheet thickness. A full parametric study was performed, and results include the calculation of the sheet thickness and key engineering values (pressure, force, torque), as well as yielded areas for viscoplastic materials exhibiting yield stress. A comparison of LAT simulation results with experimental results is also presented for pseudoplastic materials (using results available in the literature) and for viscoplastic materials (using the experiments of the present Thesis). For pseudoplastic fluids, it was proved that LAT with slip correctly predicts the shape of pressure distribution and the values of the rest of the quantities of interest, such as final sheet thickness and torque. For viscoplastic materials, there is qualitative agreement, as LAT is based on shear flow. A full two-dimensional analysis was next conducted based on the Finite Element Method (FEM), for the solution of the conservation equations and the rheological constitutive equations. Non-isothermal solution with slip at the wall confirmed previous results for PVC. For viscoplastic materials the 2-D analysis proved the inability of LAT to correctly predict yielded-unyielded areas, which were then correctly predicted. As opposed to LAT, the comparison with the experimental results showed that there is good quantitative agreement for the torque for both materials, and brought out the need to integrate all stresses (shear and normal) for the calculation of torque, since the flow is fully two-dimensional. For the final sheet thickness, only qualitative agreement was found, with the simulations under-predicting the experimental values. This brought out viscoelastic recoil after detachment, where the material acquires a free surface. Viscoelasticity was not however included in the present Thesis. The present Doctoral Thesis led to a better understanding of the process of calendering and rolling for non-Newtonian materials, such as polymers and some foods that exhibit pseudoplastic and viscoplastic behavior. A number of problems have been solved and others were presented, that are conducive for further research. The better understanding of the process for non-Newtonian materials can help in the efficient design of the process, which can prove beneficial for both research and industrial production.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2008
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Σοφού, Σουλτάνα
- Sofou, Soultana
Subjects
dc:subject × 20- Κυλίνδρωση
- Έλαση
- Ιξωδοπλαστικότητα
- Τάση διαρροής
- Ψευδοπλαστικότητα
- Ρεολογία
- Ρεομετρία
- Μέθοδος πεπερασμένων στοιχείων
- Calendering
- Rolling
- Viscoplasticity
- Yield stress
- Pseudoplasticity
- Rheology
- Rheometry
- Finite elements method
- Επιστήμες Μηχανικού και Τεχνολογία
- Μηχανική Υλικών
- Engineering and Technology
- Materials Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/16206