Back to search

National Technical University of Athens (NTUA)

Παρασκευή υδραυλικών ασβεστοπυριτικών και ασβεσταργιλικών ενώσεων με ήπιες τεχνικές. Εναλλακτικοί τρόποι παρασκευής κλίνκερ

Abstract

dc:description

The subject of this Ph.D thesis is ’’Preparation of Hydraulic Calcium-Silicate and Calcium- Aluminate compounds with low temperature techniques. Alternative ways for clinker preparation’’ and the aim is the development of ways for the preparation of hydraulic calciumsilicate and calciumaluminate ccompounds and materials through wet chemical synthesis. Specifically, the following materials were prepared through sol-gel and polymeric precursor routes: 3CaO.SiO2, 2CaO.SiO2, 3CaO.Al2O3 and 4CaO.Al2O3.Fe2O3 . 3CaO.Al2O3 - 4CaO.Al2O3.Fe2O3 mixture. three standard types of calcium aluminate cements (High Alumina - HA, Low Alumina - LA και Standard Low Alumina - SLA) The effect of the starting conditions (ratios of reactants, temperature, pH) on the preparation of the precursor material and the sintering conditions on the final product was examined. Solid-state synthesis was also applied for comparison reasons. Finally, a combination of techniques (DTA/TG, XRD, FTIR, SEM) is applied for the characterization of the intermediate and final products. As it was concluded the polymeric precursor route can be successfully applied for the synthesis of the hydraulic compounds and materials. All the compounds and materials (with the exception of 3CaO.SiO2) are satisfactorily formed after a three-hour sintering at 1000 oC. The formation of 3CaO.SiO2 requires a three-hour sintering at 1500 oC. The sintering products are close to the equilibrium compounds and this must be taken into consideration for the calculation of raw materials’ composition. Finally, the kind of cement synthesis (conventional or Pechini) does not have any effect on the reactions of hydration and the nature of hydration products. The starting conditions strongly affect the preparation procedure. In the polymeric precursor route, the determinative conditions are the reactants ratios, the gelation temperature and the drying temperature. In the sol-gel synthesis, the determinative conditions are the order of the solutions’ addition, ratios of the H2O, ΤΕΟS and EtOH and the agitation of the starting solution. The kind of catalysis (basic or acidic) does not affect the final product. The final products consist of fine and uniform grains. β- 2CaO.SiO2 is obtained without chemical stabilizers or sudden cooling. The way of preparation does not affect the hydration reactions and products. The combination of TG/DTG, XRD, FTIR and SEM leads to the recording of all the transformations occurring during the processing of the precursors and the formation of the final products.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2007

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Chrysafi, Revekka
  • Χρυσάφη, Ρεβέκκα

Subjects

dc:subject × 9

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/16277

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Chrysafi, Revekka; Χρυσάφη, Ρεβέκκα. Παρασκευή υδραυλικών ασβεστοπυριτικών και ασβεσταργιλικών ενώσεων με ήπιες τεχνικές. Εναλλακτικοί τρόποι παρασκευής κλίνκερ. National Technical University of Athens (NTUA), 2007. http://hdl.handle.net/10442/hedi/16277