Back to search

National Technical University of Athens (NTUA)

Ο ρόλος της πυριτίας στη βελτιστοποίηση των μηχανικών ιδιοτήτων της πορσελάνης

Abstract

dc:description

The aim of this Ph.D. work is to investigate the quartz related factors that affect the mechanical properties of porcelain as well as the mechanisms that control the development of high mechanical strength. The studied range of values for each factor was focused οn the range that is used in industrial practice. In this context, the effect of filler grain size, quartz content, firing temperature and time on the physical and mechanical properties of a sanitaryware porcelain has been studied. The results are being discussed in respect to the three suggested theories on porcelain strength (i.e. matrix reinforcement theory, dispersion strengthening theory, mullite hypothesis). The investigation has been carried out by using the Taguchi method for experimental design. It is shown that quartz grain size is the most important factor regarding porcelain strength. It influences strength in two ways: directly by inducing compressive stresses to the vitreous phase and indirectly through the development of a favorable microstructure. It is shown that two perquisites have to be met in order to achieve high bending strength. These are a well developed microstructure and a high direct effect of quartz. Both are met for bodies containing quartz grains in the range 5-20 μm. These bodies exhibited ~30% higher strength than the reference industrial porcelain. The results do not confirm the mullite and the dispersion strengthening hypothesis. On the other hand the matrix reinforcement theory and the mechanism that quartz grains retard crack propagation agree with the results. Subsequently, the work is focused on the direct effect of quartz on strength. The aim is to study the direct effect as a function of quartz grain size and content without the interference of the indirect effect. Silica fume (SF) is used in order to achieve dense microstructure with varying quartz content and grain size. The results showed that SF enhances sintering allowing the development of a dense microstructure even when coarse quartz is used. Strength is increased in the cases which sintering would be incomplete, without the addition of SF. However, when the microstructure is adequate dense, increasing the SF content reduces strength. It is also shown that increasing the levels of quartz grain size and content results in increased strength. However, after a certain point, further increase of coarse quartz content results in strength reduction due to the induction of flaws around the quartz grains.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2007

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Stathis, Georgios
  • Στάθης, Γεώργιος

Subjects

dc:subject × 13

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/16292

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Stathis, Georgios; Στάθης, Γεώργιος. Ο ρόλος της πυριτίας στη βελτιστοποίηση των μηχανικών ιδιοτήτων της πορσελάνης. National Technical University of Athens (NTUA), 2007. http://hdl.handle.net/10442/hedi/16292