Back to search

National Technical University of Athens (NTUA)

Ολοκληρωμένη προσομοίωση εξέλιξης τοπογραφίας κατά την εγχάραξη μικρο- και νανο-δομών με πλάσμα

Abstract

dc:description

The technology used for the fabrication of microelectronics devices and microelectro- mechanical systems (MEMS) is based on the successive deposition or growth of planar layers and the subsequent transfer of the desired pattern onto these layers. Lithography and plasma or wet etching are the essential steps of this technology. Profile control of the etched structures is necessary for the efficient operation of the corresponding microelectronics devices and MEMS. The loss of microscopic uniformity (e.g reactive ion etching lag) and deviations from the perfectly anisotropic profiles of the structures (e.g. microtrenching, sidewall bowing, roughness) are etching artifacts that make the profile control difficult. There is a need to understand the mechanisms causing these artifacts and suppress them. Besides experimental study, topography evolution simulation of the etched structures can contribute to this direction. The goal of this work is the development of an integrated simulation framework for the topography evolution of structures etched with plasma. This framework links the bulk plasma gas phase with the profile of the etched structure and consists of: 1) A local flux calculation model. Shadowing and reemission of flux are taken into account. This model links the species fluxes in the bulk plasma gas phase with the local species fluxes inside features. 2) A surface etch model. This model includes the processes during the etching of SiO2 and Si surface with fluorocarbon plasma. The surface model is a phenomenological model that takes into account the competitive phenomena of etching and deposition occurring during etching with fluorocarbon plasma. The model is based on site balances on the etched surface and links the species local fluxes with the local etching rate. 3) An algorithm for the topography evolution of the etched features. The level set method is implemented. The algorithm uses the local etching rate to move the topography of the etched structures. The third component of the simulation framework, the topography evolution algorithm, is a general boundary evolution algorithm, which can be applied in several areas, such as the evolution of an interface between two fluids in fluid mechanics. The coupling of the first two models of the simulation framework [components (1) and (2)] that yields the local etching rate, defines the boundary evolution problem that the boundary evolution algorithm, namely the level set method, solves.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2005

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kokkoris, Georgios
  • Κόκκορης, Γεώργιος

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/16428

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kokkoris, Georgios; Κόκκορης, Γεώργιος. Ολοκληρωμένη προσομοίωση εξέλιξης τοπογραφίας κατά την εγχάραξη μικρο- και νανο-δομών με πλάσμα. National Technical University of Athens (NTUA), 2005. http://hdl.handle.net/10442/hedi/16428