Back to search

National Technical University of Athens (NTUA)

Μελέτη δομής και εφαρμογών ενεργού άνθρακα προερχόμενου από πυρηνόξυλο και άλλα γεωργικά προϊόντα

Abstract

dc:description

The objectives of this thesis are to investigate the use of solvent extracted olive pulp as a precursor for the preparation of activated carbons and compare their physicochemical characteristics and their ability to remove contaminants from aqueous solutions and olive mill waste waters, to that of activated carbons prepared from other agricultural by-products, namely olive stone. The preparation of activated carbons was performed with a two-step physical activation method, at various conditions with reference to the heating rate during carbonization and activation and the final soaking time of each step. Surface area and microporous volume of the carbons were evaluated with nitrogen 77K adsorption porosimetry and iodine number values, while mesopore volume (in combination with nitrogen porosimetry data) and macropore volume were obtained from mercury porosimetry. Heating rate of 10°C/min, during carbonization and activation, leads to more developed structures than of 5°C/min increasing carbonization time from 90min to 120min resulted in pore enlargement towards mesopores with simultaneous increment of the surface area. Increasing activation time and consequently increasing bum-off, developed the whole pore range, but the yield of the final product was decreased. Solvent extracted olive pulp resulted in different structures than olive stone, peach and apricot stone and this is attributed to the variation in the lignocellulosic content of the starting material. Simultaneous pyrolysis/activation, in the presence of steam, is an economical alternative, since the initial carbonization step is neglected. However it requires further investigation. Modification of slightly activated carbons, further activated, was also studied, using glucosamine, glucosamine hydrochloride and urea. Urea alters the properties of the activated carbon towards micro- and macroporosity. Diffusion of urea into the porous network, shields the pores from the action of the activating agent (for lower micropores) and act as a catalyst for the enlargement of larger micropores and mesopores to macropores. Glucosamine and its hydrochloric derivative, being larger molecules than urea, are mainly deposited onto the mesopores, blocking the narrower pores while the larger ones are significantly enlarged to macropores. Microporosity of these carbons increases but in a lower degree than with urea. Increasing soaking time, allows for urea better diffusion into the pore network but this is related to the porosity of the carbon to be modified. A more developed porous network allows for urea to enter into the inner core of pores protecting them from enlargement, by the activating agent, and thus leading the steam to create new pores. Decreasing urea concentration, during modification, led to lower micropore volume favoring mesoporosity, due to the limited deposition of the modifying reagent onto the micropore region. Modification either of the precursor or of the carbonized char did not improve the physicochemical characteristics of the final product. All the activated carbons produced, were amorphous materials with heterogeneous morphology and curvatures along their surface. Selected activated carbons were tested for their efficiency to remove metals from aqueous solutions. These carbons possess a basic character (pH>7) and high number of basic surface groups. The metals investigated were Th+4, Cu+2 και Zn+2. The carbons from olive pulp showed higher removal ability for thorium ion, than from olive stone, which was attributed to their different surface chemistry. Although olive stone carbon came with a more developed structure, it showed a lower adsorption. Modified carbons with urea and glucosamine hydrochloride, resulted in a slightly higher adsorption. Carbons originated from peach and apricot stone present the higher removal ability for copper ion while ACOP carbon from olive pulp follows at dose levels of adsorption, although it has the less developed structure. Peach carbon came up with significantly lower adsorption ability. Olive pulp carbons, having a higher number of basic groups, showed a remarkable efficiency for binding zinc ion than the other three materials. However, more developed structures for carbons from olive pulp, did not favor the removal efficiency. Diminishing inorganic matter by washing the precursor with H2SO4 or the activated carbon with warm water, decreased the adsorption levels. Oxidation of a selected carbon has led to the same result. When the pH was adjusted at the levels of the non-oxidized carbons, the adsorption approached that of the corresponding non oxidized carbon. On the contrary, pH adjustment at 3 significantly lowered the adsorption levels. The aforementioned findings reveal that the adsorption of metal ions onto carbon surfaces is independent of surface area and porosity development but is close related to a number of parameters such as surface oxides, inorganic matter and pH. In addition the ability of selected carbons to remove organic molecules was also evaluated. The removal of dimethylphenol (DMP) from aqueous solutions as well as of total phenols and total organics (as expressed by the decrease in COD) from Olive Mill Waste Water (OMWW) was investigated. The adsorption of organic molecules depends on the structure of the carbon, while mesoporosity is the key factor in the adsorption of total phenols. In the case were carbons have similar physicochemical characteristics (micro- and mesopore volume for carbons Π8 and K7) the presence of carbonyl groups seems to favor phenol adsorption due to EDA complexation. In the case of total organics, surface area and micropore volume are the controlling factors for maximum performance efficiency of the carbons. The first experiments towards the direction of using activated carbons from agricultural by products, as precursors in the preparation of biosensors, via immobilization of GOx enzyme, are prominent being an interesting alternative in the exploitation of agricultural by products. It is estimated that during olive oil production, the ratio of olive oil to olive pulp is 1:1,37 while the ratio of olive oil and olive stone is 1:1,77. Since Greece is the third largest producer of olive oil, after Italy and Spain, the resulting by products olive stone and solvent extracted olive pulp, investigated in this current thesis, are abundant precursors for the preparation of activated carbons, which can be used in a variety of applications. Using these activated carbons in the water treatment would provide a twofold solution to environmental problems. The volume of solid wastes would be reduced while the treatment of contaminated water would be achieved at a reasonable cost.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2002

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Μεταξάς, Μιχαήλ
  • Metaxas, Michail

Subjects

dc:subject × 16

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/16480

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Μεταξάς, Μιχαήλ; Metaxas, Michail. Μελέτη δομής και εφαρμογών ενεργού άνθρακα προερχόμενου από πυρηνόξυλο και άλλα γεωργικά προϊόντα. National Technical University of Athens (NTUA), 2002. http://hdl.handle.net/10442/hedi/16480