National Technical University of Athens (NTUA)
Ενισχυτές ισχύος ασύρματων μητροπολιτικών δικτύων βασισμένων στο πρότυπο 802.16
Abstract
dc:descriptionBroadband wireless terminals have experienced a significant growth permitting integration of multi-mode functionality (WLAN, UMTS, etc.) in a single handset. In such portable devices, reducing power dissipation prolongs battery life. As PAs dominate power consumption in many RF systems, employment of more efficient amplification schemes (e.g. Class AB, E, F) could alleviate this problem. However, reduction of the conduction angle of an RE amplifier poses the disadvantage of compromising linearity compared to a linear class-A amplifier at a given output power. A solution that allows linear - and at the same time - efficient amplification would therefore be of merit to RF power amplifier development. While inherently more nonlinear compared to the case of Class-A operation, power efficient PAs exhibit characteristics (e.g. self bias effect, gain expansion, IMD3 sweet spots) that can be exploited to improve power added efficiency and at the same time linearity. In this thesis, two main subjects are dealt with: power amplifier behavioral modeling and linear -high efficiency power amplifier design for wireless metropolitan networks. The availability of a PA behavioral model that permits effective control of PA nonlinear characteristics (e.g. self bias effect, gain expansion, IMD3 sweet spots), would be of merit to circuit and system designers since it would facilitate the identification of the PA specifications leading to optimum tradeoff between power dissipation and linearity. The first part of this work describes such a model. The new empirical RF PA behavioral model was developed through a progressive build-up of “forward” decoupled equations representing realistic PA behavioral characteristics such as, dc current dissipation, gain expansion and compression and IMD3. As such effects are inherently coupled in actual PAs, the model also employs feedback to establish the mutual nature of such dependencies without compromising its ability to individually control a certain nonlinear characteristic through certain sub-sets of model parameters. Employment of such model in wireless system design would allow the evaluation of the impact of PA nonlinearity on system performance as well as the identification of PA design specifications leading to optimum linearity and efficiency tradeoffs. In this direction, a WLAN 802.11a transmitter, oriented to assess the specification margins for a commercially off-the-shelf (COTS) PA, was simulated using the developed model. The PA parameterized model was adopted to co-simulate the EVM, as a result of the minor variations of the above described nonlinear characteristics relative to the nominal case. This method can eventually lead to the specifications margins of that particular PA. In the second part of this thesis, a new amplifier linearization technique is proposed. The technique relies on the direct manipulation of the power transistor’s average input current to accomplish good efficiency at low output power levels without compromising linearity at higher output power levels. The technique is based on the re-use of self bias resulting in improving the 1-dB compression point of the amplifier without compromising efficiency at low RF drive power levels. The circuit which is used, supplies the PA with an appropriately multiplied replica of the net current increase due to self bias. The latter current is isolated and fed back into the base of the power amplifying transistor. At low output power levels this extra current is negligible and increases at high output power levels. Thus, at low power levels the quiescent current remains low minimizing power dissipation, while at high power levels it increases to an adequate amount that permits the PA to improve its power capability by extending its 1-dB compression point. In other words, efficiency is preserved at low output power levels while power capability is improved at high output power levels. The measurements preformed on the prototype that was designed and built confirmed the functionality of the technique.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2008
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Βρυσάς, Κωνσταντίνος
- Vryssas, Konstantinos
Subjects
dc:subject × 16- Ενισχυτές ισχύος ραδιοσυχνοτήτων
- Μοντελοποίηση συμπεριφοράς ενισχυτών ισχύος
- Παραμόρφωση AM-AM και AM-PM, "sweet spot" προϊόντων ενδοδιαμόρφωσης
- Ενισχυτές ισχύος υψηλής αποδοτικότητας και γραμμικότητας
- Γραμμικοποίηση ενισχυτών ισχύος
- Τεχνική επαναχρησιμοποίησης του ρεύματος αυτοπόλωσης
- RF power amplifiers
- Behavioral modeling of RF power amplifiers
- AM-AM and AM-PM distortion, IMD "sweet spots"
- High efficiency and linearity RF power amplifiers
- Linearization of RF power amplifiers
- Self bias re-use technique
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/16501