National Technical University of Athens (NTUA)
Προσομοίωση της μηχανικής συμπεριφοράς δομημένων και ανισότροπων εδαφικών υλικών
Abstract
dc:descriptionThis dissertation studies the mathematical modelling of the mechanical behaviour of structured geomaterials, aiming primarily to the development of a new elastoplastic constitutive model. This model is applied to experimental results and is implemented to the finite elements code ABAQUS. The mechanical behaviour of a geomaterial depends on the current state (stress state and specific volume) and the structure (stress history and bonding). Bonding results in increased stiffness, strength and dilatancy and under special occasions in collapsible behaviour. Bonding is defined as any process that leads to an increased interparticle resistance compared to the one that stress history justifies. The anisotropy of a soil is a result of the combined actions of stress history and bonding. Stress history and bonding can coexist or act independently. The new Intrinsic Compressibility Framework that portrays all structureless states, i.e. states where the mechanical behaviour depends on current state, is introduced. Moreover, mathematical equations that describe this framework are proposed. These are successfully applied to the experimental test results, performed during the current dissertation on the reconstituted Vallericca clay. The Unified Behavioural Framework of Geomaterials proposed next, embodies the Intrinsic Compressibility Framework and describes the structure effect on the mechanical behaviour of geomaterials, emphasizing on the anisotropy. New semi-empirical correlations of the intrinsic properties (constants of the structureless states) with respect to the index properties are presented. These correlations are based on a large number of bibliographic data collected, giving high correlation coefficients. These new correlations can be applied for the estimation of the compressibility and strength constants of the majority of the constitutive models based on Critical State Soil Mechanics (e.g. Cam - Clay). Their application on the experimental data of reconstituted Vallerica clay proved to be successful. The newly proposed constitutive Model for Structured Soils (MSS-2) is based on the Unified Behavioural Framework, is an elastoplastic - rate independent and belongs on the bounding surface kind of models with two similar yield envelopes (“bubble” type). The MSS-2 model is evaluated through: a) parametric analyses of the model constants (laboratory tests simulation at material point), b) the simulation at material point of real experimental results (monotonic loading laboratory tests at the reconstituted Vallericca clay, new tests, and at the natural Vallericca clay, tests from the dissertation of Amorosi, 1996) and c) the application of the proposed constitutive model in the finite element numerical code ABAQUS (typical laboratory tests on three dimensional mesh -static and coupled consolidation analyses). It is concluded that the constitutive Model for Structured Soils can describe simultaneously, alone or in combination the following aspects: - inelastic behaviour under monotonic and cyclic loading at any loading direction, - cyclic mobility at cyclic undrained shear, - evolution of anisotropy and decrease of bonding over increasing inelastic strain, - increased, due to bonding, stiffness, strength and dilatancy, - decrease of stiffness, strength and dilatancy due to decrease of bonding and - dependence of dilatancy from anisotropy. Suggestions and directions for future research consist of: a) possible improvement methods of the model, b) the application of the model into experimental data of other geomaterials that have different bond loss mechanisms and rates, c) the application of the model into experimental data from cyclic loading tests and d) the analysis of typical problems in geotechnical engineering by applying the model into anisotropic - bonded soils (e.g. problematic - sensitive materials).
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2008
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Belokas, Georgios
- Μπελόκας, Γεώργιος
Subjects
dc:subject × 18- Καταστατικές σχέσεις
- Πλαστικότητα
- Δομή εδαφών
- Αριθμητική προσομιίωση
- Ανάλυση
- Ανισοτροπία
- Άργιλοι
- Constitutive relations
- Plasticity
- Structure of soils
- Numerical modelling
- Analysis
- Anisotropy
- Clays
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Πολιτικού Μηχανικού
- Engineering and Technology
- Civil Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/16534