Back to search

National Technical University of Athens (NTUA)

Βελτίωση εψησιμότητας μίγματος πρώτων υλών παραγωγής κλίνκερ

Abstract

dc:description

The subject of this dissertation is the Burnability Improvement of the Cement Raw Mix for Clinker Production. The target of this work is the improvement of the burnability of the raw mix used in the production of clinker through the addition of minor elements, their classification according to their reactivity and the evaluation of their effect on the structure of clinker and the properties of cement. The dissertation comprises of 3 well defined stages: Investigation of the effect of minor elements on the CaO-SiO2-Al2O3-Fe2O3 quaternary system. This stage includes a study on the effect of the kind and concentration of addition of minor elements on the reactivity of the CaO-SiO2-Al2O3-Fe2O3 system, and the study of the structure and physicochemical characteristics of the sintering products. As it is concluded, the introduction of minor elements in the CaO-SiO2-Al2O3-Fe2O3 quaternary system, even in low concentrations, differentiates considerably his reactivity during sintering. The systematic and comparative recording of the effect of 20 cations and 8 anionic species, concluded that the action of the additives is connected with changes on the physicochemical properties of the liquid phase (the action is located in the final stage of sintering and is proportional to the size of element or inversely proportional to his electronegativity, e.g. W, Mo, Nb, Pb, Cd, Zr, Co, Zn, Ni, Ba, Li), with a shift on the reaction of alite formation (the action is related to the increased solubility of elements Cr, Sr, B in belite phase) and with the effect of added elements on the combination reactions of the four major components. In the last case the differentiations are obvious even in the region of reactions between solids in low temperatures (Cu, Sn). Synthesis and study of CuO and ZnO modified cements. In this stage cements were prepared from modified clinkers originated from sintered industrial raw mixes doped with 1.0% w/w CuO and ZnO, while the hydration, mechanical and physical properties and leachability of the modified cements was studied. As it is concluded, the incorporation of the Cu and Zn added elements in clinker negates their by any chance negative effect in the rate of hydration, that they exhibit when added in the cement. The addition of CuO and ZnO in the raw mix for clinker production exerts a positive effect on the mechanical properties of the corresponding cements, without causing significant differentiation on the physical properties. Case study on the use of Greek minerals as mineralizers. This stage includes the selection and the characterization of Greek minerals for the introduction of selected elements in the raw mix, in doping concentrations of 0.5-2.0% w/w, the thermal study of sintering, production of clinker and study of their structure, cement preparation and study of the hydration and their physical and mechanical properties. The case study on the use of Greek minerals showed that the addition of wolframite (main constituent: FeWO4), stibnite (main constituent: Sb2S3) and a wolframite-stibnite assemblage exerts a positive effect during sintering without differentiating significantly the mechanical and physical properties of the produced cement, contrary to the addition of colemanite (main constituent: Ca2B6O11.5H2O) and celestine (main constituent: SrSO4) that exerted a negative effect on the raw mix burnability, by favoring the formation and stabilization of belite at expense of alite phase. Based on the above remarks it is concluded that the introduction of minor elements by the addition of selected secondary materials can lead to significant improvement of the burnability of the raw mix in clinker production, by altering his reactivity during sintering, in spite of the low addition levels. Based on the obtained results during the study of the effect of individual elements on the reactivity of the CaO-SiO2-Al2O3-Fe2O3 quaternary system, a preliminary assessment of the effect of complex additives on the industrial raw meal can be achieved, with satisfactory reliability. However, due to the complexity of the sintering and hydration processes and the fact that the simultaneous action of a great number of minor elements cannot be considered as cumulative, the use of specific materials as mineralizers must be dealt as a case study that will cover the sintering stage as well as the properties of the final product.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2003

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kolovos, Konstantinos
  • Κολοβός, Κωνσταντίνος

Subjects

dc:subject × 28

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/16715

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kolovos, Konstantinos; Κολοβός, Κωνσταντίνος. Βελτίωση εψησιμότητας μίγματος πρώτων υλών παραγωγής κλίνκερ. National Technical University of Athens (NTUA), 2003. http://hdl.handle.net/10442/hedi/16715