Back to search

National Technical University of Athens (NTUA)

Γεωτεχνική ταξινόμηση και τεχνικογεωλογική συμπεριφορά ασθενών και σύνθετων γεωϋλικών κατά τη διάνοιξη σηράγγων

Abstract

dc:description

This doctoral thesis deals with the geotechnical classification and the engineering geological behavior of weak and complex rock masses in underground excavations. The research mainly focuses on non- urban tunnels using conventional methods of tunnelling. The complexity of these geological material guides to a more specialized research and geological characterization due to the special features of their rock masses regarding both their structure as well as their lithological characteristics. The weak and complex rock masses under analysis have most of the times undergone highly tectonized disturbance resulting in the destruction of their initial structure, weathering, the involvement of rocks with extremely low strength and generally a multi-heterogeneity. The study comprises the types of rock masses that can be developed by flysch, molasse, brecciated limestone, ophiolites and disturbed gneiss. The recent research about weak rock masses and their engineering geological behavior as well as the experience gained by the recent tunnelling in the Greek mountains, under particularly difficult geological conditions, provide good and sufficient data for the study of the influence of these conditions on the behavior of the geological material as well as on design and construction methods. The present thesis aims at examining the geological factors affecting the geotechnical behavior of the weak rock masses in underground excavations, at correlating the factors involved during the investigation of the validity and application of the classification systems and at connecting the characteristics of this geomaterial with the rock mass strength. The purpose of this dissertation deals with the requirements in the field study, the evaluation of the geotechnical behavior and the design and construction methods under these particularly difficult geotechnical conditions. The geotechnical description of the weak and complex rock masses is not examined in isolation but in connection with a variety of information. This includes the description of the geological environment in which the rock masses were formed, the analysis of geotechnical characteristics determining the “keys” for their stability during the underground excavation, the estimation of the strength and the deformation modulus of the intact rock, and their classification for the geotechnical characterization that enables the estimation of the strength and deformability of the rock mass. In that way we can estimate the geotechnical behavior of the unsupported tunnel sections of the underground excavation and the required primary support measures as a quality approach. In order to make substantial use of the experience accumulated from the construction of several tunnels, and to process this material, a database was constructed which was called “Tunnel Information Analysis System” and is referred to as TIAS. The creation of such a database is itself an indispensable part of the thesis. The purpose of the database is the comparison of the anticipated and the actual geological and geotechnical conditions, the evaluation of the applied classification methods of the rock masses as well as the correlations regarding their behavior and the immediate support measures. The fundamental source for the creation of the database was the 62 tunnels of Egnatia Highway. On those tunnels there has been, for the thesis purposes, field work and data processing, essential for the design and tunnel construction. It needs to be emphasized that many of these tunnels have been constructed under particularly difficult geotechnical conditions. The database integrates 96 tables of input data, 66 associated with geotechnical characteristics and 30 specifically referring to the tunnels. It provides archive information, information in order to monitor the tunnels in relation to their geological environment as well as information used for the comparison of the study and construction of new tunnels under similar conditions. The data input and processed by TIAS has to do with results from boreholes, laboratory or on site testing, classifications, engineering geological behavior (gravity driven failures, tunnel deformations) underground water, design parameters, geotechnical analysis in addition to information concerning primary measures of immediate support and finally the cost. In order to present and analyze all the above, for each of the studied geomaterial, a series of characteristic geological, engineering geological and geotechnical information-model, was created so that this information can easily be located according to the geomaterial and the type of the rock mass. For every category of geomaterial, what is examined is the general geological model of the rock masses’ environment based on the lithology, the formations’ structure, the main tectonic features, the hydrogeological conditions, the degree of weathering and the morphology. Within this frame, the geological model of the rock mass is analyzed with the characteristics of fragmentation, weathering, and also of the disintegrated, chaotic or sheared structure. The geotechnical classification of these rock masses is an essential part of the thesis. The results from analyzing the characteristics of the structure and the discontinuities have led to the formation of new diagrams displaying quantitative information through the Geological Strength Index (GSI) system for the rockmasses of flysch, molasse, gneiss (in its disturbed form) and what is also provided are the range of projection for the limestones and the ophiolites. At the same time, instructions for applying the GSI system are provided, the limitations for applying the classifications on weak rockmasses are discussed as well as cases of erroneous use of the classifications. Moreover, the thesis analyses and recommends, for these geomaterials, the range of values for the parameters σci and mi of the Hoek and Brown failure criterion, as well as the modulus ratio (MR), based on the processing of laboratory testing results. Values for heterogeneous rockmasses are also proposed. In addition to the geotechnical classification of the rock mass and in relation to that, there is a further classification of the weak and complex geomaterial that was examined based on its geotechnical behavior during the tunnelling excavation, in relation to the categorized failure mechanisms and the in situ stresses in each case. Therefore, there is an equivalence in the possible failure mechanisms (deformation due to overstressing, overbreakes or wedge failure, “chimney” type failure, raveling ground) and the scale of such failure. In general, the application of the well-known classification systems has the drawback of not displaying necessarily information concerning the rock mass behavior in the tunnels. Consequently, there are many cases in which the geological “identity” of the geomaterial is lost since it isn’t involved in the analysis and in that way it is possible that its special characteristics are mislaid. In any case, it is highlighted that a sound geotechnical judgment holds a vital part when there is an attempt to quantify the rock mass’ characteristics. Within this framework, a system for assessing the failure type mechanisms of the rock mass behavior for unsupported tunnel-section was created, based on specific engineering geological parameters and the in situ stresses. These are the structure (according to the GSI), the values of intact rock strength σci and the overburden thickness. The assessment deals with overburden ranges up to 300m. After defining the most possible failure types for every kind of the predicted rock mass, the most appropriate design parameters are identified (either of the rock mass, GSI, σci, mi, if it displays an isotropical behavior, or characteristics of discontinuities if it behaves in an anisotropic manner). In that way, the accuracy of the classifications and the support system can be managed directly from the direct tunnel observation and monitoring (deformation measurements or the characteristics of possible failures, stress or gravity driven, during the tunnel excavation). The innovative parts of the thesis are presented as following. - The engineering geological characteristics of weak and complex rockmasses are examined, regarding their behavior in underground excavation. - New rock mass classification diagrams are introduced within the general concept of the GSI system, or specific projections in the existing diagram, for the weak and complex geomaterial. - A new engineering geological series of characteristic geological, engineering geological and geotechnical information models, is proposed for each type of rock mass from the studied geomaterial that includes a standardization of its qualitative engineering geological characteristics, the quantitative of the geotechnical classifications, the strength and deformation parameters, the assessment of the behavior in underground excavations, depending on the in situ stresses, and qualitative instructions-guidelines for the primary support measures. - A system of estimating the engineering geological behavior is presented, with specific rock mass’ parameters based on the possible failure type mechanisms and by suggesting support measures, as concept, depending on the failure mechanisms. - A geotechnical tunnel database was originally created, with information concerning 62 tunnels enabling, in various ways, the analysis and correlation of numerous geological and geotechnical information. The processing and evaluation of the data, derived from the database allows to assess the real behavior of the geomaterial and to formulate the correlations of this behavior to the immediate support requirements and the technical processes of the tunnel construction.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2007

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Marinos, Vasileios
  • Μαρίνος, Βασίλειος

Subjects

dc:subject × 14

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/16840

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Marinos, Vasileios; Μαρίνος, Βασίλειος. Γεωτεχνική ταξινόμηση και τεχνικογεωλογική συμπεριφορά ασθενών και σύνθετων γεωϋλικών κατά τη διάνοιξη σηράγγων. National Technical University of Athens (NTUA), 2007. http://hdl.handle.net/10442/hedi/16840