National Technical University of Athens (NTUA)
Ανάλυση και σχεδίαση μιας νέας τοπολογίας υβριδικού αντιστροφέα πολλαπλών επιπέδων με πηγή τάσης
Abstract
dc:descriptionThe scope of this dissertation was the design and analysis of a new multilevel inverter topology, which is suitable for high-voltage and high power applications. Initially, in the chapters one to three, the main voltage source multilevel inverter topologies with their simulation results for sinusoidal pulse width modulation were presented. From the analysis, important information for each type of multilevel inverter, such as: the amplitude of fundamental frequency harmonic, the total harmonic distortion, the amplitude and frequency of dominant harmonic as well as the allocation of sideband harmonics around the switching frequencies, was concluded. The conclusions from this analysis offer a base for a thorough understanding of operation of each type of multilevel inverter. Furthermore, the above information is necessary for filter design in the case of harmonic depression. In the fourth chapter, the topology of a novel voltage source four-level inverter was presented and analyzed. The proposed inverter, when it is compared with a conventional four-level neutral-point diode-clamped inverter, exhibits a better distribution profile of power losses among its semiconductor devices. As a result, a better utilization of semiconductor devices of the proposed inverter is obtained, especially for high-power applications. This behaviour of the proposed inverter arises from the ability of the inverter to accomplish the intermediate voltage levels with more than one switching strategies. Selecting the suitable switching strategy, the best result on the distribution of power losses among the semiconductor devices can be obtained. On the contrary, the conventional inverter has not this ability, since it offers only one switching strategy for obtaining the several voltage levels. In addition, the proposed inverter is more efficient than the conventional inverter for high-power applications with high power factor and high modulation index, since it exhibits up to 30% lower power losses. A new technique for theoretical calculation of the proposed inverter semiconductor power losses was developed, which can be applied to any multilevel inverter. The theoretical results of power losses were confirmed by simulation results. For the space vector pulse width modulation of the proposed inverter, a simplified algorithm for calculation of the duty ratios of voltage vectors was developed with excellent results on the inverter output waveforms. The use of the proposed modulation algorithm can be extended to any type of multilevel inverter. The voltage balance of the inverter dc-link capacitors was ensured by using two novel balancing techniques. For three phase operation, the capacitors voltage balance was obtained by a new space vector pulse width modulation algorithm, which was based on the ability of inverter virtual voltage space vectors to induce zero average currents on the intermediate dc-link neutral-points. For one phase operation, the capacitors voltage balance was obtained by a self-voltage balancing topology, which is composed of auxiliary semiconductor switches and capacitors. The balancing effect of both techniques was confirmed by simulation results. The proposed techniques can also be applied to a conventional inverter for balancing the dc-link capacitors voltages, especially for applications with a high power factor. Finally, the simulation results of the proposed inverter output voltage and current waveforms were confirmed by experimental results. In the fifth chapter, a novel predictive current control technique for multilevel voltage source inverters was presented. The proposed method can be applied to any multilevel inverter, also including the proposed inverter, for high-voltage high-power applications. The method allows optimum reference current tracking for all operating conditions under low current harmonic distortion as a result of many voltage vectors that participate in the control process. Furthermore, the proposed control ensures fast dynamic response and decoupling effect between the load current components. Simulation and experimental results verified the effectiveness of the proposed predictive current controller.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2007
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Perantzakis, Georgios
- Περαντζάκης, Γεώργιος
Subjects
dc:subject × 13- Αντιστροφέας πολλαπλών επιπέδων με πηγή τάσης
- Ημιτονοειδής διαμόρφωση εύρους παλμών
- Ημιαγωγοί στοιχείων, Απώλειες ισχύος
- Σταθεροποίηση τάσεων πυκνωτών ζυγού ΣΡ αντιστροφέα
- Voltage source multilevel inverter
- Sinusoidal pulse width modulation
- Space vector pulse width modulation
- Semiconductor power losses
- De link capacitors voltage balance
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Ηλεκτρολόγου Μηχανικού, Ηλεκτρονικού Μηχανικού, Μηχανικού Η/Υ
- Engineering and Technology
- Electrical Engineering, Electronic Engineering, Information Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/16859