Back to search

National Technical University of Athens (NTUA)

Σχεδιασμός μεταλλικών κατασκευών με μεθόδους αυτόματου ελέγχου

Abstract

dc:description

The purpose of this thesis is to contribute to the scientific area of structural control, and more specifically, to the combination of earthquake engineering and control theory. It is attempted to bring together these two scientific areas, and to make appropriate modifications, where needed, in order to have an integrated control procedure suitable to control civil structures. Existing control algorithms, which were developed from researchers in other fields, like electrical or mechanical engineering, are investigated. The electrical and mechanical devices are different from buildings as far as the static behavior is concerned. The first, in most cases, are mechanisms, while the second ones are constructions with a high degree of redundancy. Thus, there is a need of selecting, and then modifying, algorithms that are suitable for the control of buildings. Also, in the control of electromechanical devices, the loading is known a priory, while for buildings the earthquake loading is unknown. Thus, a common feature of all control strategies that are proposed in this thesis, is that they are based on the on-line monitoring of the incoming earthquake signal, recognizing its dynamic characteristics, and modifying the corresponding dynamic characteristics of the building, in an attempt to avoid resonance between the structure and the loading. The pole placement algorithm is the first algorithm that is investigated. This algorithm assumes that the desired poles (eigenvalues) of the controlled structure are a priori known. If the loading and its dynamic characteristics is known in advance, then we can apply the pole placement algorithm with predefined constant poles, in order to avoid the resonance. This is not the case in the control of structures subjected to earthquakes. The frequency content changes from one earthquake to the other, or even within the duration of the same earthquake. Therefore, we are not able to apply the pole assignment algorithm with predefined constant poles. This shortcoming is addressed by the present thesis, by proposing a systematic, adaptive procedure for the calculation of the desired poles of the controlled structure. This procedure is based on the dynamic characteristics of the incoming earthquake signal. The signal is measured on-line by sensors, and its frequency content is recognized by FFT or wavelet analysis. The proposed methodology transforms each consecutive part of this signal, as well as the structure, to the complex plane and, depending on their relative positions, andfollowing specific rules, the desired poles of the controlled structure are calculated and adjusted during the earthquake. According to those poles, and using the pole placement algorithm, the feedback matrix is estimated, and then the equivalent forces that should be applied to the structure by the control devices, which are installed on the building, are calculated. The sliding mode control algorithm is also investigated. In the sliding mode control algorithm the sliding surface, which is a surface on which an orbit of the phase state remains while moving towards the equilibrium point, is firstly calculated, followed then by the calculation of the control forces. In the present thesis, the proposed procedure of the calculation of the desired poles is also applied for the estimation of the sliding surface, while the control forces are obtained based on Lyapunov stability theory. Furthermore, a new control algorithm for active variable stiffness systems is proposed. The proposed algorithm controls the function of the active variable stiffness devices that are located into the structure. These devices are equipped with a valve, which activates or deactivates the connection between braces and beams, thus changing the dynamic characteristics of the building. The proposed algorithm is also based on the frequency content of the incoming earthquake signal. The dynamic control procedure consists of monitoring the signal, calculating its frequency content, and deciding whether to open or close the valves, in order to avoid resonance and to reduce the response of structure. The verification of the above control algorithms has been carried out by means of numerical simulations. Dynamic control analysis for single and multi-degree of freedom systems subjected to sinusoidal, earthquake and pulse loading were performed. From the numerical results it is shown that the above algorithms are efficient in reducing the response (displacements and accelarations) of building structures. Furthermore, practical issues that influence the effectiveness and the reliability of the proposed control algorithms are investigated. First, the effect of the position of the control forces is examined. Selecting the position of the control forces, which is an issue of optimizing the design process, is investigated by parametric variation of the location matrix of the control force in the equation that describes the controlled structure. The simulation results confirm the already known principle of controllability, that if the number of control positions is equal to the number of degrees of freedom of the structure, then full control of the system is achieved. In that case, the building then performs a rigid body motion, following the imposed ground motion, without relative displacements between the floors. It was also shown that with reduced number of control forces, positioned at appropriate locations, which is a more realistic choice for real buildings, the response can be reduced at a satisfactory level. Finally, two more practical issues that influence the effectiveness and the reliability of the proposed control algorithms, namely time delay and saturation of the control force, have been also investigated. Those parameters come into consideration, by solving the differential equation of motion as a delay differential equation with saturation effects. The expected negative influence of those parameters is verified. Thus, there is a need to take them into account in the numerical simulations before the installation of the control system on the real building.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2007

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Pnevmatikos, Nikos
  • Πνευματικός, Νίκος

Subjects

dc:subject × 18

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/16903

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Pnevmatikos, Nikos; Πνευματικός, Νίκος. Σχεδιασμός μεταλλικών κατασκευών με μεθόδους αυτόματου ελέγχου. National Technical University of Athens (NTUA), 2007. http://hdl.handle.net/10442/hedi/16903