Back to search

National Technical University of Athens (NTUA)

Μελέτη της σχέσης δομής και θερμομηχανικής συμπεριφοράς με στόχο τη βελτιστοποίηση προηγμένων πολυμερικών υλικών με βάση κυανικούς εστέρες

Abstract

dc:description

This PhD thesis deals with the structure-property relationships and thermomechanical behaviour of advanced polymeric nanocomposite materials, based on cyanate ester resin. The reinforcing phase was an organo-modified layered silicate, under the trade name montmorillonite. Special attention was paid to the study of the structure, viscoelastic behaviour and mechanical properties of these materials in order to optimize their performance. The major drawbacks of polycyanurate networks are low toughness at room temperature and brittleness. Therefore, in order to improve such shortcomings, modifications of the matrix with polymers containing flexible chains, like polyoxytetramethylene glycol (PTMG) and poly(urethane methacrylate) (PUMA) were also performed and studied. The structure, morphology and topology of the specimens were investigated with wide angle X-ray scattering (WAXS), scanning electron microscopy (SEM) and atomic force microscopy (AFM), the overall viscoelastic behaviour, main and secondary transitions were examined with dynamic mechanical analysis (DMA) and the mechanical properties (modulus of elasticity, stress and elongation at break) were studied with tensile stress-strain tests. The modulus of elasticity of layered silicate/polymer nanocomposites was studied with three models, initially developed for conventional (Chen- Cheng model and Taya-Chou model) and/or nanocomposites (Odegard et al. model). These models were modified with the 'effective particle approach', in order to take into account the discrete nanoclay structure. This approach enables the connection between the weight fraction of the clay and the volume fraction of the effective particle, which is a function of the structural parameters of the clay. For the theoretical description of modulus, this procedure was applied to the Taya-Chou model, which estimates the stiffness of a composite containing two different types of inclusions. In our case, the two kinds of inhomogeneities were ascribed to the exfoliated sheets and the intercalated particles, respectively, each one possessing a specific percentage of the total clay weight fraction. The intercalated particles were treated as prolate inclusions, whereas the exfoliated sheets were considered fiber-like. This formalism was then implemented to experimental data of the present dissertation and to results from the literature, and revealed a method for the simultaneous quantification of the degree of exfoliation and degree of reinforcement via micromechanical modeling. A new micromechanical model was then presented, for the elastic and elastoplastic description of layered silicate/polymer nanocomposites. The model was based on previous works, dealing with the calculation of the stiffness matrix of composite materials (Chen-Cheng model), and the prediction of the elastoplastic behaviour of inhomogeneities embedded in a homogeneous matrix (Kroner, Budiansky and Wu's self-consistent model). Following this approach, the macroscopic properties of the composite material are linked with the microstructural parameters of the effective particle. The elastic and plastic deformation of the matrix and the inclusions were separated according to the kinematic description developed by Rubin. This model was then applied to simulate experimental results taken from the present work and the literature, and it was proven that it can successfully describe the non-linear (elastoplastic) behaviour of nanocomposite materials.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Anthoulis, Georgios
  • Ανθούλης, Γεώργιος

Subjects

dc:subject × 14

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/16971

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Anthoulis, Georgios; Ανθούλης, Γεώργιος. Μελέτη της σχέσης δομής και θερμομηχανικής συμπεριφοράς με στόχο τη βελτιστοποίηση προηγμένων πολυμερικών υλικών με βάση κυανικούς εστέρες. National Technical University of Athens (NTUA), 2009. http://hdl.handle.net/10442/hedi/16971