University of Thessaly (UTH)
Ανάπτυξη και μελέτη νέων υλικών κυψελίδων καυσίμου με στόχο την απευθείας χρήση της αιθανόλης για παραγωγή ηλεκτρικής ενέργειας
Abstract
dc:descriptionSolid Oxide Fuel Cells have been considered as one of the most promising technologies for high-efficiency electric power generation. Ethanol is considered to be an alternative green fuel for fuel cell applications, with high energy density and could also overcome both the storage and infrastructure challenge of hydrogen for fuel cells. The direct use of ethanol on the anode electrode opens the pathway for various benefits, such as the higher efficiency by utilizing the heat which is released in chemical reactions, the simplification of the complexity of the system without the requirement of the fuel reformer and the reduction of the overall system cost. The complete electro-oxidation of ethanol to carbon dioxide and water is regarded to be a crucial matter and still remains a hard challenge. In this thesis, the ethanol steam reforming reaction is initially studied on silver (Ag) and platinum (Pt) catalysts. The experimental results showed the difficulty in dissociation of the carbon-carbon bond in ethanol’s molecule, leading to the formation of various byproducts such as acetaldehyde, carbon monoxide, methane, C2s, etc. Furthermore, the operation of three different configurations of solid oxide fuel cells fed directly with ethanol (DESOFCs) was studied. Firstly, Ag/YSZ/Ag and Pt/YSZ/Pt fuel cells were investigated and secondly an anode supported fuel cell Ni-YSZ/ScCeSZ/LSM was fabricated and tested. Finally, the performance of a PtCe/YSZ/PtPr fuel cell was evaluated and the products distribution was studied under both open and closed circuit conditions. It is proven that microstructure and choice of materials play a crucial role for the performance of the fuel cell. In all cases, the experimental results showed that the increase of power density was more rapidly enhanced above 600°C, which could be attributed to the improved ethanol reaction kinetics and to the higher ionic conductivity of the electrolyte at elevated temperatures. The maximum performance was achieved in Ni/ScCeSZ/LSM fuel cell which exhibited power density equal to 114 mW/cm² at 1000°C. In order to improve the electrochemical performance, new catalysts with higher electrochemical activity should be developed and studied. Moreover, new electrolyte materials with higher ionic conductivity at lower temperatures should be chosen, as well as the knowledge of reaction mechanisms and the associated kinetic rate constants must be known.
Degree
thesis:*- Grantor dc:publisher
- University of Thessaly (UTH)
- Year dc:date
- 2007
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Poulianitis, Constantinos
- Πουλιανίτης, Κωνσταντίνος
Subjects
dc:subject × 21- Κυψελίδες καυσίμου
- Κυψελίδες καυσίμου στερεού οξειδίου
- Αιθανόλη, Απευθείας τροφοδοσία σε κυψελίδες καυσίμου
- Τεχνολογία, Εναλλακτική
- Αιθανόλη, Ηλεκτροοξείδωση
- Κυψελίδες καυσίμου, Ηλεκτρόδια
- Κυψελίδες καυσίμου στερεού ηλεκτρολύτη
- Ηλεκτρική ενέργεια, Παραγωγή
- Fuel cells
- Solide oxide fuel cells
- Ethanol , Direct use in fuel cells
- Technology, Alternative
- Ethanol electro-oxidation
- Fuel cell electrodes
- Fuel cell electolytes
- Characteristic curves of fuel cells
- Electical energy production
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/17107