National Technical University of Athens (NTUA)
Μελέτη δομής και ιδιοτήτων αγώγιμων πολυμερών της πυρρόλης και τεχνολογικές εφαρμογές αυτών
Abstract
dc:descriptionA new class of polymers that present intrinsically electric conductivity (intrinsically conductive polymers - ICP) has been prepared and studied in the recent two decades. These conductive polymers have attracted the interest of the International Scientific Community due to the particular characteristics that they present, combining the advantages of polymer (e.g. low density, flexibility) with the electric conductivity of a metal. In the present work the research was focused in the optimization of polypyrrole’s (PPY) synthesis in laboratorial scale, the synthesis of conductive polymers with new doping ions such as and , the structure study, the temperature impact and the study of the thermal ageing phenomenon in polypyrrole’s structure and properties. The polypyrrole synthesis was made by using various methods and conditions and finally the optimal concentrations for the production of polypyrrole powder doped with PTS, , and were found. By using the optimized synthesis conductivities in the order of magnitude 102 S/cm were achieved. The use of PTS as doping ion gives to the polymer higher conductivity, while renders it more constant in the temperature impact. As it was proved the polymer’s conductivity is intensely influenced by the temperature increase which increases the rate of conductivity decreasing, as well as from the presence of atmospheric oxygen which accelerates the ageing effect. The polypyrrole’s structure was studied by using spectroscopic analytical methods such as FTIR and XPS. The structure of chemically prepared PPY follows the two dimensional model without differentiating by the doping ions which influence only the polymer’s conductivity. The oxidant (ammonium persulfate) doesn’t have a critical role in the configuration of final structure, but it can influence the conductivity, as it acts also as doping ion. The presence hydrogen bonding N-H…N, which is formed between the lone pair of electrons of the nitrogen and the hydrogen on a second -NH, was detected. The hydrogen bonding is in between the carbon layers. Deuteration of pyrrole’s monomer was achieved, while the effort for deuteration of polypyrrole was not successful. Deuterated pyrrole’s polymer was prepared only by using D2O instead of Η2Ο during the polymer’s synthesis in a dry box by using 99.99% N2. The conductivity decrease that was observed after the deuteration, as well as the deuteration failure of the prepared polymer can be attributed to polypyrrole’s two dimensional structure and to lower mobility of the D atom regarding to the H atom. The polypyrrole was used for the metallization of industrial polymers/plastics such as ABS. A polypyrrole thin layer was deposited onto the ABS surface. For the polypyrrole synthesis PTS was used as doping ion and (NH4)2S2O8 as oxidant. As it was proved, the role of oxidant is double because at the same time etches the ABS surface increasing the PPY adhesion on it. This gives us the opportunity to replace the chemical etching of ABS with chrome-sulfuric acid that is used in the classic industrial methods, giving rise to environmental problems. In the next step it was achieved the copper plating of our specimens in an electrolytic cell by applying the properly current intensity. Thus, it was proved that the deposited PPY layer onto the ABS surface has sufficient conductivity in order to be copper plated. The laboratory method that was developed is environmentally friendly, decreases considerably the steps of the conventional productive process and the water consumption, while there is no need to use precious metals (Pd). The main disadvantage is the longer time that is required for the metallization. Another application that was developed was the metallization of the Printed Circuit Board holes (through hole plating) which is manufactured from epoxy resins reinforced with glass fibres. Polypyrrole presented remarkable selectivity during it’s deposition onto the surface of PCB specimens, coating only the epoxy resin surface of walls of holes, leaving the copper surface untouched. The polypyrrole layer that was deposited by in situ immersion has sufficient conductivity for this application, since then the copper plating of the specimens is possible. An important advantage of this laboratory method is the less process steps concerning the graphite method that is used in our country. Besides, the proposed method is environment friendly, without the use of dangerous reagents and the wastes are limited. Polypyrrole was used for the anticorrosion protection of aluminium alloys either as conversion coating or as primer pigment. Novel polypyrrole conversion coatings were developed by in situ polymerization onto aluminium alloys specimens.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2008
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Lamprakopoulos, Stylianos
- Λαμπρακόπουλος, Στυλιανός
Subjects
dc:subject × 18- Αγώγιμα πολυμερή
- Πολυπυρρόλη
- Φασματοσκοπία υπέρυθρου - FTIR
- Προστασία από διάβρωση
- Επιμεταλλώσεις μονωτών
- Μελέτη δομής
- Μελέτη αγωγιμότητας
- Conductive polymers
- Polypyrroles
- Infrared spectroscopy - FTIR
- Corrosion protection
- Insulators metallization
- Structure study
- Conductivity study
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/17246