National Technical University of Athens (NTUA)
Τυρβώδεις κυκλικές φλέβες αρνητικής άνωσης υπό γωνία σε ακίνητο ομογενή αποδέκτη
Abstract
dc:descriptionIn this Doctoral Thesis negatively buoyant jets which are discharged at an angle to the horizontal into a homogeneous and calm ambient with horizontal bottom are investigated. The jets are discharged upwards from the bottom to the surface (except of the experiments with LIF technique) and due to buoyancy the jets return back on the bottom. The investigation is both theoretical and experimental and includes the flow of the jet and the spreading of the density current which is formed on the solid boundary after the impingement of the jet on the bottom. Theoretical analysis of the problem is based on dimensional analysis and gives equations for the estimation of the main flow parameters based on the initial conditions at the source, which require experimental verification. Theoretical analysis also includes mathematic simulation of the flow by means of integral modeling. The study of the spreading of the density current on the bottom is based on dimensional analysis. A large number of experiments were carried out (about 170) regarding the flow of inclined negatively buoyant jets. The experiments include recording of the jet flow by means of a digital video camera, concentration measurements (time averaged and RMS values) as well as visualization of the jet flow using LIF (Laser Induced Fluorescence) technique. In some of the experiments the spreading of the density current which formed on the bottom due to the impingement of the jet was also recorded by a second camera. Furthermore, ten experiments were carried out regarding the spreading of the density current which is formed on the bottom due to the impingement of a positively buoyant jet. Most experiments were conducted at a special built experimental apparatus in the Applied Hydraulics Laboratory of NTUA; experiments with LIF technique were conducted at the Laboratory of Hydromechanics and Environmental Engineering of the University of Thessaly. The first experimental part of this thesis includes 66 experiments of recording by means of a digital video camera the evolution of the jet, which was colored with red dye. Six different angles, 45°, 60°, 75°, 80°, 85° and 90° to the horizontal and a wide range of densimetric Froude numbers (about 10 to 60) are studied. The flow was fully turbulent at the source (in most cases Re₀>6000). From the experiments data are obtained regarding the main flow characteristics of the jet trajectory. More specifically, for each angle the following parameters are estimated: the initial terminal height of rise, i.e. the maximum height of rise of the upper boundary at the initiation of the flow the final terminal height of rise, i.e. the maximum height of rise of the upper boundary at steady state the horizontal position of the terminal height of rise the horizontal distance from the nozzle of the jet upper boundary at the location where the jet returns at the level of the nozzle the horizontal distance from the nozzle of the jet axis (centerline) at the location where the jet returns at the level of the nozzle. The experimental data confirm theoretical equations which are based on dimensional analysis and the constants of proportionality in these equations are determined. The results are compared to available experimental data presented in the literature and the comparison shows satisfactory agreement. The second experimental part includes 95 experiments of concentration measurements at characteristic positions in the jet flow. Three different angles (45°, 60° και 75°) and a wide range of densimetric Froude numbers (about 20 to 50) are examined with fully turbulent flow from the source (Re₀>6000) in all cases. The measurements were carried out at many points at the location of the terminal height of rise mostly at the vertical and less at the transverse direction. Results are presented regarding the distribution of the mean (time-averaged) concentration normalized by the maximum mean concentration as well as for the turbulent intensity of the concentration (RMS concentration normalized by the maximum mean concentration). The results of all the experiments regarding mean concentration for the same angle are presented in the same non- dimensional graph and it is seen that there is no dependence on the initial densimetric Froude number. The same is observed for the intensity of turbulence. Moreover, concentration measurements were conducted at the region where the jet returns at the level of the nozzle in order to estimate the centerline dilution. From the concentration measurements the centerline dilution at the location of terminal height of rise and at the region where the jet returns on the nozzle level are obtained. Based on the measurements and on dimensional analysis, equations are given for the computation of the dilution versus the initial densimetric Froude number. Also, data about the jet trajectory were obtained, such as the maximum (terminal) height of rise of the jet axis and the width of the mean concentration distribution. In particular, the heights from the nozzle to the location of the maximum mean and RMS concentration are computed. The normalized mean concentration seems to follow the Gaussian distribution from the centerline to the upper jet boundary and with that assumption the width of the distribution is estimated. Using dimensional analysis and experimental data equations are given for each inclination angle regarding the computation of the heights and of the mean concentration distribution width versus the initial jet parameters. Results are also presented from eleven experiments conducted with the LIF (Laser Induced Fluorescence) technique from which qualitative conclusions are drawn for the jet trajectory and the concentration distribution in the flow filed. The flow of inclined negatively buoyant jets issuing into a homogeneous and calm ambient is simulated by means of two integral models, the model GM (Gaussian distributions for the mean velocity and mean concentration) and the model THM (Top Hat distributions) both employing a variable entrainment coefficient along the jet trajectory. The entrainment coefficient varies between two values, the jet entrainment coefficient corresponding to momentum driven flow (jet) and the plume entrainment coefficient corresponding to buoyancy driven flow (plume). It is seen that when using the conventional value of the jet entrainment coefficient, both models underestimate the flow parameters regarding jet trajectory and dilution. After an extensive investigation it was found that using a reduced value for the jet entrainment coefficient, the model predictions for most flow parameters are in satisfactory agreement with the experimental results of the present thesis. Further, the problem of the spreading of a density current on a horizontal solid boundary (bottom) due to the impingement of a jet which is initially discharged upwards with negative buoyancy and then returns to the bottom is investigated. Theoretical analysis is based on dimensional analysis and provides equations for the computation of radial distance from the point of jet impingement to various points on the outer boundary of the density current versus the initial jet parameters, as well versus the jet parameters, at the point of jet impingement. The theoretical analysis requires experimental confirmation. From nineteen experiments of inclined negatively buoyant jets discharging at angles 45°, 60°, 75° and 85° to the horizontal and for densimetric Froude numbers from about 7 to about 50, at which the density current spreading was also recorded, the radial distances of many points of the outer boundary are obtained. The radial distance is related to time from the initiation of the spreading and theoretical analysis is confirmed. Subsequently, the radial distance is normalized by the initial jet parameters and also by the flow parameters at the location of jet impingement on the bottom, the latter obtained by the integral modeling presented previously. The variation of the normalized radial distance against densimetric Froude number is also investigated. Finally, ten more experiments are presented concerning the spreading on the bottom of density currents which are formed on the bottom after the impingement of vertically or horizontally discharged positively buoyant jets, and the results are discussed and compared to those of the negatively buoyant jets.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Papakonstantis, Ilias
- Παπακωνσταντής, Ηλίας
Subjects
dc:subject × 16- Διάθεση βαρέων υγρών απόβλητων
- Φλέβες αρνητικής άνωσης
- Τροχιά φλέβας
- Κατανομές συγκέντρωσης
- Ολοκληρωματικά μοντέλα
- Ρεύματα πυκνότητας
- Disposal of dense effluents
- Negatively buoyant jets
- Jet trajectory
- Concentration distributions
- Integral modeling
- Density currents
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Πολιτικού Μηχανικού
- Engineering and Technology
- Civil Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/17380