Back to search

National Technical University of Athens (NTUA)

Διαμόρφωση και τεχνολογικές ιδιότητες του κράματος αλουμινίου 5083

Abstract

dc:description

In the past decade a variety of aluminium alloys has been produced, in order to fulfill the increasing demand for innovative materials in various technological and industrial fields. This demand has led towards the investigation of thermo-mechanical processing (forming) and quality control of these alloys, with the aim of improving their technological properties (resistance to corrosion, wear, oxidation etc.) In this Ph.D. Thesis, the effect of cold rolling (0-15%) on the technological properties of 5083 wrought aluminium alloy was investigated. This alloy has been used extensively in the aerospace, automotive, shipbuilding and construction industries, whereas its chemical composition is 95.2% Al, 3.5% Mg, 0.5% Mn, 0.3% Si, 0.26% Cr, 0.24% Fe (according to American Association for Metals ASM). In the beginning of each chapter of this Ph.D. Thesis, an introduction to basic theories concerning the corrosion, cathodic hydrogen charging, wear and deposition of composite coatings is presented. Recent reports are also analyzed, in order to draw some significant deductions. At the end of each chapter, the experimental procedure along with the obtained experimental results are presented and discussed, so as to examine the relation between the structure and metallography of 5083 aluminium alloy, with and without cold rolling, and its technological properties. Structural and metallographical study of 5083 aluminium alloy, before and after the cold rolling treatment, was performed with the aid of X-ray Diffraction (XRD), Metallurgical Microscopy, Scanning Electron Microscopy (SEM) and Electron Dispersive Spectroscopy (EDS) techniques. This alloy was found to consist of: (a) aluminium solid solution, (b) Mg2Si intermetallic phase and (c) Si. In the following chapters, the effect of cold rolling on the microhardness, work hardening, corrosion behaviour (3.5% NaCl), cathodic hydrogen charging and wear behaviour (under dry, corrosive and lubricative conditions) was studied thoroughly. Finally, the deposition of electroless Ni-P-Fly Ash composite coating on the surface of 5083 wrought aluminium alloy was performed in order to improve the technological properties of this alloy. This Ph.D. Thesis aims in providing new knowledge concerning the effect of cold rolling process on some important technological properties of 5083 aluminium alloy. It should be taken into consideration that most aluminium alloys are submitted to various forming procedures before being used in technological applications. However, very little is known about the effect of forming treatments on the properties of aluminium alloys.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Georgiou, Emmanouil
  • Γεωργίου, Εμμανουήλ

Subjects

dc:subject × 22

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/17392

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Georgiou, Emmanouil; Γεωργίου, Εμμανουήλ. Διαμόρφωση και τεχνολογικές ιδιότητες του κράματος αλουμινίου 5083. National Technical University of Athens (NTUA), 2009. http://hdl.handle.net/10442/hedi/17392