Back to search

University of Patras

Τεκμηρίωση δυνατότητας μετρήσεων ταλαντώσεων δύσκαμπτων κατασκευών με GPS και Ρομποτικό Θεοδόλιχο (RTS): Πειραματική, αναλυτική προσέγγιση και εφαρμογές

Abstract

dc:description

The present study focuses on the documentation of the high perfomance of GPS and RTS in monitoring of rigid structures, as those with main modal frequencies higher than 1Hz. The developed methodology was based on experimental assessment of the performance of GPS and RTS, on upgrade of the instruments and development of analytical techniques for the process of GPS and RTS time series. The experiments were based on an experimental device which produces pre-adjusted oscillations of known characteristics (of amplitude 0.5-3cm and frequency 0.05-4Hz), which were simultaneously recorded by GPS and RTS. Based on analysis of GPS and RTS records the time series of the oscillations derived. For the analysis of the oscillation time series techniques (i.e. Normperiod code for the spectral analysis) were developed in order to overpass problems of the instruments records (gaps of data, uncontinious data). Based on these techniques the amplitude and the frequency of the time series were estimated and in sequence were compared with the real, pre-adjusted values. From the comparison was proved that GPS can define accurately the oscillation frequency (deviation <0.05Hz for frequency up to 4Hz) and RTS can define accurately the oscillation amplitude (deviation <2mm for amplitude 5mm). RTS measurements were more accurate than GPS, but GPS records accurately the oscillation waveform due to the higher recording frequency. The instruments and the adopted methodology were for the monitoring of the response of two rigid structures: the Steel Railway Bridge of Gorgopotamos and a steel pedestrian bridge in Athens. In both bridges was proved that GPS data can define the waveform of the dynamic response of the bridges and their main modal frequencies (up to 5Hz), while RTS define accurately the amplitude of the dynamic (4-5mm) and semistatic (3-4mm) response of the bridges. Thus, the combination of the time series of GPS and RTS can define the kinematic response of a rigid structure and its main dynamic characteristics.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Psimoulis, Panagiotis
  • Ψιμούλης, Παναγιώτης

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/17748

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Psimoulis, Panagiotis; Ψιμούλης, Παναγιώτης. Τεκμηρίωση δυνατότητας μετρήσεων ταλαντώσεων δύσκαμπτων κατασκευών με GPS και Ρομποτικό Θεοδόλιχο (RTS): Πειραματική, αναλυτική προσέγγιση και εφαρμογές. University of Patras, 2009. http://hdl.handle.net/10442/hedi/17748