Back to search

National Technical University of Athens (NTUA)

Τεχνολογικές βελτιώσεις επισκευών των κατασκευών με επιθέματα από σύνθετα υλικά

Abstract

dc:description

The airspace industry has suffered a serious blow starting with the 9-11 incidents up to the current global economic crisis. The cutting down of cost, dictated from the managerial sector of the company and applying to the entirety of sectors and processes, most of the times negatively affect the quality and/or reliability of the output. One basic segment of the overall system is the repair of aeronautical structures. The Composite Patch Repair technique (CPR), has gained an important position within this specific industry, due to the advantages offered to the structure but also the reduced costs compared to other repair techniques. Nevertheless, CPR is only accredited for secondary structures thus generating the need to verify and ensure the endurance and overall quality of this technique. This PhD thesis actually constitutes a scientific effort towards this direction. Initially numerous existing scientific efforts concerning this field were examined and evaluated, in order to formulate a plan oriented towards the equitable optimization of the CPR technique. Having consolidated the up to now knowledge and having perceived the requirements that should be satisfied, initially effort went into the evaluation of a novel adhesive (product of collaboration between sub-projects) with regard to physical and mechanical properties and finally the behavior of the novel material in the application of repair with composite patches under virtual loading conditions. Afterwards the phenomenon of delamination was investigated, the most usual cause of failure for repairs with composite patches. With the use of the numerical method of finite elements the determination of optimum placement for optical fibres inside the patch was rendered possible serving towards localization of possible delaminations. These results were used in experimental trials of repaired structures under fatigue loading, where the optical fibres received completely satisfactory data. The embedding of dielectric sensors to the specified repairs presents great interest as the potential of monitoring physical properties is given both for the adhesive and the patch while in the curing phase but also in service (potential of structural health assurance- ageing of materials). The novel notion of embedding wireless dielectric sensors under the repair was deemed greatly interesting. Initially the introduction of holes at the vicinity of a crack was examined by analyses with the Finite element method. These holes can serve as housings for the sensors. The encouraging results were validated by experimental trials. The next challenge was to monitor the curing process simultaneously with dielectric and fibre Bragg grating (FBG) sensors in a series of experimental data. The results were combined in order to determine the end of cure thus providing an enhanced verification on the repair’s quality. Finally, a logic of a Structural Health Monitoring (SHM) system was formulated (for CPR), based on Neural networks algorithms, providing monitoring of a repair’s structural integrity.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Kalkanis, Konstantinos
  • Καλκάνης, Κωνσταντίνος

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/17772

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Kalkanis, Konstantinos; Καλκάνης, Κωνσταντίνος. Τεχνολογικές βελτιώσεις επισκευών των κατασκευών με επιθέματα από σύνθετα υλικά. National Technical University of Athens (NTUA), 2009. http://hdl.handle.net/10442/hedi/17772