University of Ioannina
Αντιστροφή, εφησυχασμός και δυναμική της μαγνήτισης σε σύγχρονα μαγνητικά μέσα εγγραφής
Abstract
dc:descriptionHard disk drives for ultra-high storage densities require small grain sizes to fulfill the requirements for high signal to noise ratios. However, as the grains become too small, the bits are no longer stable. This effect is known as superparamagnetic limit. It has its origin in thermal fluctuations which lead to spontaneous switching of the magnetization. In small magnetic particles, the energy barrier for thermally activated switching is given by the product KV, where K is the magnetocrystalline anisotropy constant and V is the grain volume. Thus, the reduction of grain size can be balanced by a large anisotropy. Most new concepts for ultra-high-density recording are based on high coercive materials such as FePt and CoPt. Chemically ordered FePt alloys have a magnetocrystalline anisotropy constant in the order of 10⁷ erg/cc, which is more than ten times larger than that of currently used Co-based alloys. Such a high anisotropy will ensure thermal stability at small grain sizes leading to an areal density in the Tbit/in² regime. However, conventional recording systems based on highly coercive grains require a write field that is higher than write field provided by conventional single pole heads. Victora and Shen proposed the exchanged coupled composite ECC media, which are made of the “hard” (high magnetocrystalline anisotropy) and “soft” (low anisotropy) layers exchange coupled at their interface. Reversal is initiated in the soft phase, and a domain wall is formed at the interface between the hard and soft phases. This domain wall then propagates through the hard phase under the action of an external field, causing the reversal of the hard phase in field lower than the switching field of the single hard phase. The purpose of this thesis is the study of the switching mechanisms in the hard-soft thin films bilayers for high density data magnetic storage media. Τwo different kinds of hard-soft bilayers have been studied. The first kind of composite materials is CoPt-based hard–soft bilayers with (111) texture, which have been produced by appropriate heat treatment of the bottom layer of sputtered films: after the deposition of the bottom 20nm (hard) CoPt layer, the films were annealed in high vacuum in order to crystallize the high-anisotropy L1₀ phase, and then the sample was cooled to room temperature and the top 8nm (soft) layer CoPt was deposited. In this category of bilayers two samples with different degrees of chemical ordering of the hard layer are compared. The anisotropy of the hard layer determines its robustness against destabilization from the soft one. Detailed measurements of the soft layer minor hysteresis loop features as a function of the magnetic state of the hard layer are proposed as a means to study the nature of interfacial exchange interactions and the mechanism of magnetization reversal. When hard layer anisotropy is not robust enough (annealing at 600°C for different times), the reversed soft layer can induce irreversible changes to the magnetic structure at the interface leading to a decoupling of exchange field from the magnetic state of the hard layer. In the other category of the samples (annealing at high temperatures >650°C) the hard phase is practically unaffected by the presence of the soft layer. In order to clarify the switching mechanism, CoPt (111) hard/soft bilayers has been studied by polarized neutron reflectometry (PNR) and first order reversal curves (FORC). The FORCs of samples with underlayers of different hardnesses show the same qualitative features. The reversal of the soft and the hard phase occurs in different field, indicating a weak coupling between the two phases. PNR measurements revealed in the samples heat treated at 600°C, the lateral domain size during the soft layer reversal exceeds the coherence length of the neutron beam, resulting in strong SF scattering. In contrast no SF is observed in the robust sample (annealing at 700°C) during the soft reversal, indicating smaller domain size than the coherence length of the neutron beam. This finding is consistent with the reduced remanence values of both samples. The sample heat treated at 600°C is characterized by remanence enhancement, indicating strong intergrain coupling. On the other hand the remanence of the 700°C sample is close to 2/π = 0.64, a value expected for noninteracting domains. This could explain the increased lateral domain size of the reversal process since the intergrain coupling is expected to result in large domains that include several grains.At the point of hard layer reversal no SF is observed in both samples. Thus hard reversal involves either antiparallel domains or rotating domains of size smaller than the coherence length of the neutron beam. The latter case seems probable since hard phases are expected to have comparatively smaller domain sizes. Thus a soft domain may be coupled to several hard ones along the interface giving rise to a specific dependence of the soft phase minor hysteresis loop characteristics on the magnetic state of the hard layer. The other kind of hard-soft bilayers is FePt/CoPt. Taking the advantage of the lower transformation temperature of the fct phase in FePt (400°C) than the CoPt transformation temperature (600°C), we can anneal simultaneously both layers resulting in two discrete crystal structures: the high magnetocrystallic anisotropy tetragonal phase of FePt and the low anisotropy cubic phase of the CoPt. In this case the interface between two layers is not abrupt as in CoPt based bilayers, but it exceeds several nanometers because of the interdiffusion of Co and Fe. TEM and XRR studies confirmed the existence of the two phases with an extended interface. We have modeled the effect of thermal processing with a graded interfacial region where the material parameters (i.e. anisotropy constant K) vary continuously. The graded interface has a fundamentally different magnetization behavior than a sharp interface. With increasing the full width at half maximum of the distribution function of anisotropy constant K between the two layers, the hysteresis loop becomes more single-phase-like, indicating an enhanced exchange coupling effectiveness between the CoPt and FePt layers. Loops measurements confirmed this trend, revealing a common nucleation field for both phases, which is significantly lower than the coercive field of the FePt hard phase in a single layer film, annealed at the same conditions.
Degree
thesis:*- Grantor dc:publisher
- University of Ioannina
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Alexandrakis, Vasileios
- Αλεξανδράκης, Βασίλειος
Subjects
dc:subject × 26- Μαγνητισμός
- Αντιστροφή της μαγνήτισης
- Μαγνητικό συνεκτικό πεδίο
- Μαγνητικά μέσα εγγραφής
- Υλικά υψηλής μαγνητοκρυσταλλικής ανισοτροπίας
- Μαγνητική υστέρηση
- Μαγνητικές αλληλεπιδράσεις
- Μετασχηματισμοί κραμάτων
- Διστρωματικά λεπτά υμένια
- Καθοδική ιοντοβολή
- Magnetism
- Magnetization switching
- Coersive field
- Magnetic recording media
- Materials with high magnetocrystalline anisotropy
- Magnetic hysteresis
- Magnetic interactions
- Phase transitions of alloys
- Bilayered thin films
- Sputtering
- Φυσική
- Φυσικές Επιστήμες
- Φυσική συμπυκνωμένης ύλης
- Physical Sciences
- Natural Sciences
- Condensed Matter Physics
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/17802