National Technical University of Athens (NTUA)
Θεωρητική και πειραματική μελέτη φυσικοχημικών ιδιοτήτων λεπτών υμενίων με εφαρμογές στη νανολιθογραφία
Abstract
dc:descriptionIn this work, the effect of various lithographic parameters on the produced sidewall roughness of the printed structures on photoresist films, is studied through simulation. The parameters include the size and the architecture of the photoresist, the film structure, the energy distribution in the film as a result of the exposure as well as the diffusion of the photochemically produced acid, with or without the presence of quencher molecules in the film. For this study, a new simulator has been developed that uses stochastic models for all the major lithographic steps. Modeling of the photoresist’s molecular structure can be done either at monomer level (in the case of polymers), or at a more detailed level for a more accurate representation of the monomers/molecules. The main drawback of most commercial lithography simulators is the absence of a model for the structure of the photoresist, something that is of crucial importance for the study of the effect of the process and the material on sidewall roughness. Additionally, in the present study, a way to integrate the new stochastic models for the description of the photoresist structure into the pipeline of other (commercial) simulators is presented. The results of the study show that as the size of the photoresist molecules decreases, the sidewall roughness decreases. Additionally, decrease of the diffusion length of the photochemically produced acid results in greater control of the critical dimension deviation. Those results have been observed for both polymeric and molecular resists. Comparison between polymeric and molecular resists, with similar radius of gyration, showed that the latter can give better (smaller) sidewall roughness. One more parameter studied was the photoacid generator (PAG) concentration in the photoresist film, both as a blend with the resin and as part of the polymeric resin molecules. The latter configuration showed better results with respect to sidewall roughness, mainly due to the reduced diffusion of the acid molecules and the increased sensitivity of the material. Those results showed good agreement with published experimental results, regarding the trend on the reduction of roughness. Experimental results showed that in the case where the PAG is blended with the polymeric resin, the roughness measure was almost two times the roughness of the case where the PAG molecules were part of the polymeric chains. Three dimensional simulations of both cases (with identical PAG concentrations and molecular weights of the polymeric chains) showed sidewall roughness of 3nm and 2nm respectively.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Δρυγιαννάκης, Δημήτριος
- Drygiannakis, Dimitrios
Subjects
dc:subject × 16Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/17834