University of Patras
Νέα υλικά ανόδου κελιών καυσίμου στερεού ηλεκτρολύτη (SOFC): παρασκευή, χαρακτηρισμός και έλεγχος ιδιοτήτων
Abstract
dc:descriptionIn the frame of research for the development of alternative, friendly to the environment methods for the production of energy, significant effort is focusing on SOFC (Solid Oxide Fuel Cell) technology. Due to their low pollutant emissions, fuel cells can be applied inside civil areas where the electrical power can be used together with the thermal energy generated by the cell, increasing the total performance of the device. The “state of the art” fuel cell structure is the anode electrode (Ni/8YSZ cermet), the electrolyte (8YSZ), the cathode electrode (LaMnO₃ perovskite) and the interconnector (LaCrO₃ perovskite). One of the disadvantages of fuel cells is the performance degradation due to the instability of the Ni/8YSZ anode electrode microstructure caused by metal phase sintering. This work aims to the development of new promising materials for their application as anode electrodes in solid oxide fuel cells operating at high temperatures (HT-SOFCs), as well as at the intermediate temperature range (IT-SOFCs). Concerning the HT-SOFCs, mixed ZrO₂-based ceramic oxides of the ternary systems Y₂O₃-ZrO₂-TiO₂ (YZT), Y₂O₃-ZrO₂-Nb₂O₅ (YZN) and Y₂O₃-ZrO₂-CeO₂ (YZC) were prepared, characterized and studied in terms of thermal expansion and electrical properties, as well as their potential application as the ceramic components in the anode cermet material of a SOFC, focusing on the Ni/YZT system containing 30, 40 and 45 vol% Ni. The results showed that Ni/YZT cermets exhibit improved mechanical adjustment with the solid electrolyte and enhanced structural stability compared to Ni/8YSZ while the values of the electrical conductivity remain practical constant after long-term annealing at 1000°C for up to 1000 h in reducing atmosphere (Ar/4%H₂), especially for the cermets with high TiO₂-content in the ceramic phase. Wetting experiments in the system of YZT ceramics in contact with Ni showed that TiO₂ presence enhances the bond strength at the metal/ceramic interface, which results in the decrease of the agglomeration tendency of the metallic particles. Electrochemical tests performed on fuel cells with Ni/YZT anode cermets showed encouraging results, whereas it is remarkable that for a specific composition was achieved improved performance compared to Ni/8YSZ anode. With regard to the possible reduction of the operating temperature from 900-1000°C to 650-800°C and the development of IT-SOFCs, the study was focused on CeO₂-based oxides and more specifically on the binary Y₂O₃-CeO₂ (YC) and ternary Y₂O₃-CeO₂-TiO₂ (YCT) systems. The XRD analysis of the ceramic powders after heating at temperatures up to 1400°C in air showed the formation of the cubic fluorite structure for the YC ceramic, whereas for the YCT ceramics an additional phase (Y₂Ti₂O₇) with pyrochlore structure was formed. The thermal expansion coefficient (TEC) of the ceramics measured in air between 25 and 1000°C gave comparable values, decreasing with increasing Ti content, while in Ar/4%H₂ atmosphere the TEC values of the ceramics increase dramatically at T ≥ 800°C. The absolute values of the total electrical conductivity of the ceramics measured between 450-900°C in Ar/4%H₂ increase significantly compared to those measured in air, due to their mixed conducting ionic-electronic character. The ionic conductivity of the Y₀.₂₀Ce₀.₈₀₋ₓTiₓO₁.₉ ceramics with low amounts of Ti, measured in air, is appeared strongly increased, by about half order of magnitude, compared to 8YSZ. The corresponding Ni-cermets with high amounts of yttria and low amounts of titania in the ceramic phase exhibit improved long-term stability of the electrical conductivity, while under the operating conditions of a SOFC (~ 900°C) no detectable diffusion of Ce⁴⁺ in the 8YSZ electrolyte was observed.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2007
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Μαντζούρης, Ξενοφώντας
- Mantzouris, Xenophontas
Subjects
dc:subject × 18- Κελία καυσίμου στερεού ηλεκτρολύτη
- Ανοδικό ηλεκτρόδιο
- Θερμική διαστολή
- Ηλεκτρική αγωγιμότητα
- Ηλεκτροχημικός έλεγχος
- Χημική συμβατότητα
- Διαβρεξιμότητα
- Solide oxide fuel cells
- Anode electrode
- Thermal expansion
- Electrical conductivity
- Eletrochemical test
- Chemical compatibility
- Wettability
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/17839