National Technical University of Athens (NTUA)
Μελέτη της ενσωμάτωσης θερμοπλαστικών απορριμμάτων στη σύνθεση διαφόρων τύπων σκυροδέματος
Abstract
dc:descriptionThe scope is the study of the incorporation of thermoplastic waste in concrete. The basic points as well as the indication of the most important results are described afterwards: Α) Stability of thermoplastics in the alkaline environment of concrete This stage includes the study of the stability of high density polyethylene (HDPE), polypropylene (PP) and polyethylene terephthalate (PET) in solutions with pH 9, 11 and 12.5. The results showed that taking as a criterion the stability of thermoplastics that were studied in alkaline solutions alike the alkaline concrete environment, those can be exploited as a part of conventional aggregates in concrete. Β) Physicomechanical properties of concrete containing thermoplastics Μixes of concrete containing HDPE and PP 0, 7, 12 and 20% by volume of aggregates were made. Results showed that the substitution of a part of conventional aggregates by the polymers examined has as consequence the reduction of modulus of elasticity, which is beneficial in certain applications, as concrete pavements. Also, the partial substitution of limestone aggregates by thermoplastics has as a result the reduction of concrete strength. Because of the fact that the reduction of modulus of elasticity results in reduction of induced stresses, there is a safety margin that the strength can be reduced without problems in concrete behavior. C) Effect of thermoplastic waste on the rebars’ corrosion Results showed that reinforced concrete containing thermoplastics can be safely used as it concerns its corrosion behavior. D) Calculation of induced stresses at concrete pavement In this stage a roughly estimation of the behavior of pavements of concrete containing polymers was made, taking into account the values of the mechanical characteristics that already had been determined. Results showed that concrete containing plastic aggregates can be used in pavements. In these cases, and for the percentages of replacement that were studied, the thermal induced stresses are significantly reduced, and this is a fact that positively affects the pavement behavior. The load induced stresses are slightly lower and this does not compensate completely the reduction of strength that involves with the replacement of a part of conventional aggregates with polymers. Generally, it appears that the use of this type of concrete in pavements, will require a small increase of the slab thickness, to compensate the reduction of strength.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Γκαβέλα, Σταματία
- Gavela, Stamatia
Subjects
dc:subject × 10Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/17841