Back to search

National Technical University of Athens (NTUA)

Ατομιστικές και μεσοσκοπικές προσομοιώσεις υγρών κρυστάλλων και λιπιδικών μεμβρανών

Abstract

dc:description

Atomistic and mesoscopic models of liquid-crystals and lipid membranes are presented in this PhD thesis. These models can be regarded as an important milestone for the study of anchoring at interfaces laden with water and lipids in contact with a liquid-crystalline phase. The arrangement of molecules at the aforementioned interfaces can be exploited for the development of biosensors. Initially, an atomistic model of the water-DPPC system is studied in the phase at the temperature of 325K. The predictive ability of this model is discussed in terms of structural properties, such as tilt angles, lamellar repeat distance, order parameter of alkyl tails, and diffusion constants; all these magnitudes are compared with the corresponding experimental predictions. In addition, the NERD force field was tested for the description of DPPC alkyl tails. An important disadvantage of atomistic models for complex systems is that the time and length scales they can address are very limited. Therefore, it is extremely difficult to make use of atomistic models for the study of anchoring effects at interfaces with liquid crystals. To this end, there is a pressing need for the development of reliable mesoscopic models for the system in question. As far as the system water-DPPC at mesoscopic level is concerned, we use the model developed by Marrink et al. This is a versatile model developed for the simulation of a variety of systems (lipids, surfactants, etc). To check the consistency between the different levels of description, the structural properties obtained from the mesoscopic model were compared with those from the atomistic model. The consistency between these models is satisfactory enough, and therefore permits changing the level of description for the water-DPPC system. This comparison was necessary because the mesoscopic model was not derived from the atomistic model. The need of a mesoscopic model for 5CB molecules is pressing as well. In this case, we chose to coarse-grain a recently developed reliable atomistic model by applying the Iterative Boltzmann Inversion (IBI) method, which is quite popular for polymer systems. A five-bead representation of 5CB molecules was chosen at the mesoscopic level. Two versions of the aforementioned mesoscopic model were developed; the first is charge-free, while the second incorporates two virtual atoms with partial charges, so as to reproduce the dipole moment of the cyano group. The coarse-graining took place at 320K, where 5CB molecules are found in the isotropic phase - all molecules move randomly in space without a preferential orientation. Each iteration of the IBI method entails a Molecular Dynamics simulation of 5CB at the mesoscopic level. The resulting coarse-grained force-field reproduces fourteen atomistic structural properties at the mesoscopic level. It has to be pointed out that the standard IBI method cannot be applied for the 5CB system, since it results in divergence from the first iterations. For this reason, we modified the IBI method in order to achieve convergence for the system under study. The results are excellent, since we reproduce all chosen structural properties at the coarse-grained level. As mentioned in the previous paragraph, the development of the mesoscopic force-fields took place at 320K, where the molecules do not exhibit liquid-crystalline behavior. Both mesoscopic models were tested by means of Molecular Dynamics simulations at lower temperatures, in order to check their ability to form liquid-crystalline phases. During this testing process we concluded that the model with partial charges cannot form real liquid-crystalline phases and is less satisfactory, because it suffers from a certain degree of doublecounting of electrostatic interactions. This means that the IBI method, when applied to polar molecules, can capture electrostatic interactions into the potentials of mean force. The charge-free model predicts a smectic phase instead of the nematic one found experimentally; in addition, the transition temperature from the isotropic to the ordered phase is underestimated. To correct this, a systematic modification was undertaken for the charge-free model. Through this modification we developed a model that gives a transition point very close to the experimental value and predicts a first order transition from the thermodynamic point of view. Also, the densities in the isotropic and liquid-crystalline phase are satisfactory enough. Again, however, the predicted liquid-crystalline phase is smectic. This structure, which arises also with some atomistic models, seems to result from the coarse-graining technique employed. This modified mesoscopic model can be extended to other members of the CB family (e.g 8CB), which exhibit a smectic phase in their liquid-crystalline region.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Megariotis, Grigorios
  • Μεγαριώτης, Γρηγόριος

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/17845

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Megariotis, Grigorios; Μεγαριώτης, Γρηγόριος. Ατομιστικές και μεσοσκοπικές προσομοιώσεις υγρών κρυστάλλων και λιπιδικών μεμβρανών. National Technical University of Athens (NTUA), 2009. http://hdl.handle.net/10442/hedi/17845