University of Thessaly (UTH)
Συγκριτική μελέτη προχωρημένων οξειδωτικών μεθόδων αντιρρύπανσης σε αραιά διαλύματα βαφών
Abstract
dc:descriptionIn this study the effectiveness of different Advanced Oxidation Processes is examined, namely: UV (photolysis), and the UVC/H2O2 (photochemical) methods, the Fenton reactions (Fe+2/H2O2, Fe+3/H2O2, Fe+2/H2O2/UVC, Fe+3/H2O2/UVC) as well as the photocatalytic method (UVA/TiO2 and UVA/TiO2/H2O2). Also, combinations of these methods are examined in order to determine their effectiveness in the decolorization and mineralization of some azo type reactive dyes (Procion Hexl, Remazol and Drimarene). These dyes, because of their superior performance in the textile dyeing industry, are used extensively. The oxidation of the dyes through the above-mentioned oxidative methods was determined by the decrease of the initial dye concentration. Complete decolorization was achieved in most cases in about 10-20 min. Regarding the mineralization of the dyes (measured by the TOC reduction) it ranged from about 80-93% but, this was achieved in time intervals ranging from 4 to 6 hours. The results show that the end effect of the different Advanced Oxidation Processes on the aforementioned dye categories is similar making these processes non-selective towards complete dye mineralization. Photolysis of the dye solutions at a solution pH above 12, caused a drastic increase in the decolorization of the dyes. On the contrary, a small addition of H2O2 (UVC/H2O2 process), increased the rate of oxidation enormously at a wide solution pH ranging from 3 to 10 and caused complete decolorization in less than 20 min and also substantial TOC reduction. Regarding the different kind of Fenton reactions, they are characterized by a strong acceleration of the decolorization rates, but on the other hand, with the passing of time, their ability to further degrade the dyes decelerates strongly, this becoming their main disadvantage. However, irradiation of the solution strongly accelerates the rates of mineralization. A TOC reduction of 25-30% during the Fenton-like and Fenton reactions is more than doubled when the dye solutions are irradiated. In the photocatalytic method, by examining the different parameters, it became evident that the degradation of the dyes increases as the amount of TiO2 increases and the solution pH strongly influences the oxidation rates because it affects dye adsorption onto the photocatalyst surface (TiO2). A small addition of H2O2 increases the decolorization as well as the mineralization rates of all the dyes studied. The presence of different ions, Cl-, CO32-, HCO3-, SO42-, H2PO4-, and NO3- generally decrease the decolorization and the mineralization rates to various degrees and, this can be explained in terms of mechanisms which, in the presence of these ions, reduce the effective concentration of the hydroxyl radicals. Adding the reactant (H2O2) in a series of dose increments, in all aforementioned methods, increases the intermediate stages of the reactions without substantially increasing the overall mineralization of each method. The combination of Fenton/UVC-photocatalysis, achieves a slightly higher TOC reduction when compared to each of these methods separately.
Degree
thesis:*- Grantor dc:publisher
- University of Thessaly (UTH)
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Ρήγα, Ανθούλα
Subjects
dc:subject × 20- Προχωρημένες οξειδωτικές μέθοδοι
- Οξείδωση βαφών
- Οξειδωτικές μέθοδοι
- Φωτόλυση
- Φωτοχημική οξείδωση
- Φωτοκαταλυτικές μέθοδοι
- Ανοργανοποίηση βαφών
- Αποχρωματισμός διαλυμάτων βαφών
- Advanced oxidation processes
- Photolysis
- Photochemical methods
- Photocatalytic methods
- Oxidation of the dyes
- Complete decolorization
- Mineralization of the dyes
- Oxidative methods
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/17872