Back to search

University of Patras

Ανάπτυξη θερμομονωτικών και καταλυτικών υλικών με δομή αεροπηκτώματος

Abstract

dc:description

through drying of the solvent under supercritical conditions. A typical material of aerogels is silica (SiO2) and their production is based on the sol-gel method. The present work reports on the study of synthesis of transparent silica aerogels with the use of the two-step, sol-gel method and of N(R)4F catalysts during the second step of gel formation. Aim of the work is the optimization of the aerogel synthesis method towards transparent materials and the characterisation of their structure. The role of the catalyst is important in relation to aerogel properties and the gelation time. In the course of the experimental work, a large number of hydrophilic and hydrophobic SiO 2 aerogels were synthesized. TEOS (Si(OC2H5)4) was used as silica precursor for aerogel preparation. Typical solvents during the second step were: acetonitrile, acetone, ethylacetoacetate, and others. Typical catalysts were: ΤMF (N(CH3)4F), TBF (N(C4H9)4F) and TOF (N(C8H17)4F). Samples with hydrophobic character were obtained with the use of HMDS (C6H19NSi2). Optical transmittance spectra of the samples were obtained on a UV-Vis spectometer and specific surface area, total pore volume and pore size distribution were determined by Ν2 physical adsorption. The aerogel samples were in the form of cylindrical discs of 25 mm diameter and 10 mm thickness and density of 0.05-0.20 g cm-3. Two methods of supercritical drying were employed: with the use of CO2 (CO2 method) or in supercritical conditions of the organic solvent (HT method). It was found that the solvent as well as the gelation catalyst influence considerably the optical transparency of the aerogels. The use of acetonitrile and TBF or TOF catalysts lead to the improvement of optical transparency. The average optical transmittance in the visible region for the hydrophilic samples, as calculated by the ΕΝ 401 protocol, exceeds 93%, while for the hydrophobic ones 80%. These values are the highest ever reported for such materials. The specific surface area of aerogels is in the range of 620-950 m2 g-1 . The mean diameter of the pores is between 15 and 30 nm and the total pore volume is in the range of 5-10 cm3 g-1. The transparent aerogels can be used as thermo-insulating materials, since their thermal conductivity is only 13 mW m-1 K-1 at 25 ο C. In the second part of the work, the procedure of preparation of carbon-MnOx aerogels with catalytic properties was developed, and their behavior in the catalytic oxidation of ethanol was studied. The synthesis of these materials was achieved through pyrolysis or oxidation of resorcinol-furfural resins in aerogel form, which contained manganese nitrate as a precursor of MnOx. For comparative purposes, the same materials were produced also with conventional drying. The characterization of the catalysts was done with different techniques, such as Ν2 physical adsorption, X-ray diffraction and electron microscopy. The given materials reveal amorphous or slightly crystalline character and high values of specific surface area, while the pore size is being defined by the drying method. The catalytic activity in the oxidation of ethanol is comparable to that of other MnOx catalysts prepared with different methods.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Economopoulos, Evangelos
  • Οικονομόπουλος, Ευάγγελος

Subjects

dc:subject × 18

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/17923

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Economopoulos, Evangelos; Οικονομόπουλος, Ευάγγελος. Ανάπτυξη θερμομονωτικών και καταλυτικών υλικών με δομή αεροπηκτώματος. University of Patras, 2009. http://hdl.handle.net/10442/hedi/17923