University of Patras
Μελέτη ροϊκών φαινομένων για μεγιστοποίηση θερμανταλλαγής σε ολοκληρωμένο ηλιακό σύστημα συλλέκτη - αποθήκης
Abstract
dc:descriptionIntegrated Collector Storage (ICS) solar systems use part of the hot water storage as collector, i.e. half of the storage surface is used as absorber. Usually, the storage medium serves also as the energy transfer medium (service hot water). In the examined ICS, the service water is heated indirectly, passing through a serpentine heat exchanger placed inside the tank. The heat transfer from the stored water to the service water is intensified by the agitation of the stored water. A simple solution is the recirculation of the stored water by a small pump, which is functioning whenever a request for hot water exists. Fins in suitable positions, connect the front and back surface of the ICS, to withstand the deformation due to pressures by the tank water. In the present PhD thesis, the flow phenomena inside the ICS previous mentioned, are investigated. The aim is the maximization of the heat transfer between the two water circuits. An experimental device was constructed by transparent Plexiglas, for flow visualization and velocity measurements. A dual beam Laser Doppler Velocimetry (LDV) system was used to measure velocities. Polystyrene particles were added in the comprised water, for the visualization of the path lines. Photographs and video films were also taken. The commercial code FLUENT is used for the Computational Fluid Dynamics (CFD) simulations. A CFD model is developed and solutions are obtained using all the available turbulence models. Three main factors that influence the performance are optimized: the position and size of the recirculation ports, the arrangement and size of the interconnecting fins and the heat exchanger placement. The settling time, i.e., the time required for the flow field to be fully developed, is computed both numerically and experimentally. The previous analysis leads to the following conclusions: The standard k–ω model is selected as the most appropriate. The model is validated, with good agreement, against experimental measurements of velocities and temperatures. The placement of the inlet recirculation port perpendicular to the main surfaces of the ICS should be avoided, while its diameter should be 1/2" or less. The settling time is computed about 35s. The interconnecting fins, of the two main ICS surfaces should follow the flow filed path lines. The optimal placement of the tube heat exchanger is in contact with the two major surfaces of the storage tank.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2008
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Gertzos, Konstantinos
- Γκέρτζος, Κωνσταντίνος
Subjects
dc:subject × 16- Ολοκληρωμένο σύστημα συλλέκτη αποθήκης
- Σωληνωτός εναλλάκτης θερμότητας
- Υπολογιστική ρευστομηχανική
- Ταχυμετρία Laser Doppler
- Τυρβώδης ροή σε παραλληλεπίπεδο δοχείο
- Integrated collector storage (ICS)
- Integrated collector storage solar water heater
- Laser doppler velocimetry (LDV)
- Computational fluid dynamics
- Tube heat exchanger
- Turbulent flow in parallelepiped vessel
- Fluent
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/17924