National Technical University of Athens (NTUA)
Παραγωγή σύνθετων τσιμέντων Πόρτλαντ: μελέτη φυσικοχημικών ιδιοτήτων και ανθεκτικότητας των παραγόμενων κονιαμάτων και σκυροδεμάτων
Abstract
dc:descriptionThe main target of this PhDs thesis is the production of blended cements having properties within the limits of certain specifications and also to produce mortars and concretes with the desirable physicochemical properties and durability. The PhD thesis is separated into two experimental sections: a) production of blended cements with separate grinding of their main constituents, during which the performance of binary and quaternary blended cements was originally evaluated and b) production of blended cements with co grinding of their main constituents during which the performance of several quaternary blended cements was studied so that the interactions between different materials could be determined. In order to study the synergy between different materials for mathematical equations capable to describe mechanical properties and durability of mortars and concrete was essential. In this way an empirical mathematic model was created from which useful conclusions were derived and also cements, mortars and concrete quality could be predicted and controlled. The above mentioned experimental investigation leaded to important conclusions that are summarized below. Firstly, it was feasible to produce blended cements having the forecasted by the standards physicochemical properties and also concrete and mortars with the desirable durability. Based on the study of hydration kinetics using Nuclear Magnetic Resonance (NMR) it was obvious that the other, besides clinker, main constituents have a filling effect and also modify cement pastes microstructure even at nanolevel, increasing compressive strength. On the other hand, other, besides clinker, main constituent’s reaction with water is limited especially in early ages. Quaternary blended cement and concrete made with them are selected as the best against all aspects of durability. Microstructure characteristics (total porosity and critical pore radius) were connected to compressive strength and it was proved that reducing porosity compressive strength increases. It was also proved that only the rate of carbonation from the aspects of durability is proportional to microstructures characteristics. On the contrary durability against chloride penetration depends also on the binging capacity of cements main constituents while expansion due to sulfate attack is affected by pore size distribution. Ultrasounds were used as a non destructive technique of building materials and their experimental results were connected proportionally to the mechanical and physicochemical properties of cement. Using the conclusion of the research it was possible to create appropriate equations that effectively describe quaternary blended cements properties. Using these equations it was possible to map quaternary blended cements, mortars and concrete properties and understand deeply the synergy of the different constituents in the composite material.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Pipilikaki, Panagiota
- Πιπιλικάκη, Παναγιώτα
Subjects
dc:subject × 20- Σύνθετα τσιμέντα
- Κινητική ενυδάτωσης
- Πορώδες
- Κατανομή μεγέθους πόρων
- Ανθεκτικότητα σκυροδεμάτων
- Ενανθράκωση
- Διαπερατότητα από χλωριόντα
- Προσβολή από θειϊκά ιόντα
- Blended cement
- Hydration kinetics
- Porosity
- Pore size distribution
- Concrete durability
- Carbonation
- Chlorides permeability
- Sulfate attack
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Χημικού Μηχανικού
- Engineering and Technology
- Chemical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/17992