University of Patras
Βελτιστοποίηση διεργασιών μορφοποίησης θερμοπλαστικών σύνθετων υλικών
Abstract
dc:descriptionIn the framework of the current PhD thesis, a generic concept for the optimization of manufacturing processes of composite material components with regard to product’s quality and cost is introduced. In the proposed concept the configuration of the manufacturing unit is considered as an option for optimizing families of products with regard to quality and cost. For processes offering flexibility in selecting process features and parameters, the concept can be applied straight forward. The proposed concept relies on the consideration of the processes thermal cycle as essential for both the quality and cost of the produced part. It involves a quality sensitivity analysis based on experimental data, which relates the values of the thermal cycle parameters to predefined quality characteristics (e.g. critical mechanical properties) as well as a cost analysis by relating the parameters of the thermal cycle to cost data using the Activity Based Costing (ABC) methodology. Outcome of the above analyses is the derivation of the material dependent Quality Functions (QFs) along with the derivation of the process dependent Cost Estimation Relationships (CERs). The configuration of the manufacturing unit is considered as an option for optimizing families of products with regard to quality and cost. To achieve this, the heating process has been simulated by developing a parametric Finite Element model, so as to virtually conceive heating units and calculate the corresponding thermal cycles. The latter are exploited to calculate quality and cost values using the derived QFs and CERs. The optimal thermal cycle which leads to minimum cost that satisfies the design and quality requirements, along with the allowable thermal cycle windows, is derived, by involving an iterative optimization procedure. To carry out the optimization procedure a suitable software tool, the LTSM-OPT tool, is developed and introduced. The proposed concept has been applied to optimize the ‘cold’ Diaphragm Forming (CDF) process, as well as, the Laser Transmission Welding process (LTW). The thermal sub-process involved in the processes under consideration is numerically simulated such as to allow for the virtual application of the respective thermal cycle on the material. Using the developed software the features of the CDF heating system and the LTW system configuration along with the optimal thermal cycle for producing a helicopter canopy as well as for welding stiffeners on the aircraft fuselage skin, respectively, were obtained. The results of the first study were successfully exploited by EUROCOPTER to install a new flexible CDF facility and produce helicopter canopies by applying the derived optimal thermal cycle. As well, the results of the latter analysis were successfully exploited by AIRBUS to configure and adapt a laser diode source device to weld stiffeners and riblets to the aircraft fuselage skin, and thus produce integral aeronautic structures, by applying the optimized solution derived from the present study.
Degree
thesis:*- Grantor dc:publisher
- University of Patras
- Year dc:date
- 2008
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Κατσιρόπουλος, Χρήστος
- Katsiropoulos, Christos
Subjects
dc:subject × 12- Θερμοπλαστικά σύνθετα υλικά
- Βελτιστοποίηση
- Ανάλυση ποιότητας και κόστους
- Ανάλυση με πεπερασμένα στοιχεία
- Thermoplastic composite materials
- Optimization
- Quality and cost analysis
- Finite elements
- Επιστήμες Μηχανικού και Τεχνολογία
- Επιστήμη Μηχανολόγου Μηχανικού
- Engineering and Technology
- Mechanical Engineering
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/18019