National Technical University of Athens (NTUA)
Παραμετρική ανάλυση και συστηματικός σχεδιασμός ρομπότ με πόδια
Abstract
dc:descriptionThis thesis sets the basis for a systematic approach in designing quadruped robots employing a dynamically stable quadruped running straight-ahead on level ground with a bounding gait. The outcome of the proposed methodology is the optimal shape of the quadruped robot, i.e., the relation between its physical parameters, and the optimal size of the bounding quadruped robot, i.e., the physical magnitude of it, according to desired performance criteria. The performance criterion used to size the robot is on the actuator effort to sustain an active gait, very close to a passive one, and the maximum payload capability of the robot given a target overall mass. The parametric study examines the behavior of the performance criterion over a range of non-dimensional variables connected to robot physical parameters and gait characteristics. The study takes into consideration data from experimental biology and ground surface properties, while it is subject to the existing technological limitations and economic restraints, i.e., the fact that there is a limited number of motor/gearbox combinations available from a practical point of view. By analyzing local stability, design guidelines that would reduce steady- state roll (on the frontal plane) and self-stabilize the motion of the robot passively, thus making the control of the robot more straightforward are also formulated. We show that a quadruped robot could be able to perform self-stable running behavior in significantly broader ranges of forward speed and pitch rate with suitable mechanical design. The results presented here might explain the success of simple, open loop running controllers on existing experimental robots and can be further used in developing control methodologies for legged robots that take advantage of the mechanical system. The findings from simulation results indicate that the proposed methodology can assist in the design of new, and modifications of existing quadruped robots. Finally, two legged robots, with one and four legs, are implemented based on the proposed methodology. These can be used to experimentally validate control and design approaches in legged robots at the Control Systems Lab.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Chatzakos, Panagiotis
- Χατζάκος, Παναγιώτης
Subjects
dc:subject × 12Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/18066