Back to search

University of Patras

Σύνθεση και χαρακτηρισμός πολυμερών που παρουσιάζουν ιοντική αγωγιμότητα

Abstract

dc:description

Fuel cells have gained increased attention in recent years as an efficient and environmentally friendly technology of power source. Among others, polymer electrolyte membrane fuel cells (PEMFCs) is one of the most promising candidates for use in vehicular, portable and residential applications. The currently well-developed PEMFC technology is based on perfluorosulfonic acid (PFSA) polymer electrolytes and particularly Nafion. Despite its advantages, Nafion has some severe disadvantages that relate to its high cost and its limited operation temperature (<80 oC) due to the humidification requirements. An increase of the operational temperature would increase the kinetic reaction rate, would enhance the catalyst’s CO tolerance, would provide easier thermal management etc. These, will result in flexibility to use hydrogen directly from a simple reformer, in a simplier construction and operation and finally in a significant decrease of the total operational cost. Great efforts have been and are being made to develop proton-conducting membranes which will retain and combine certain properties at higher temperature. The basic prerequisites for a polymeric material to be used as a membrane for high-temperature PEMFCs are good mechanical, thermal and chemical stability, high glass transition temperature and increased ionic conductivity after doping with a strong acid. Our approach towards the development of polymer electrolytes relates to the synthesis of aromatic polyethers bearing pyridine units in the main chain. Aromatic polyethers are attractive polymer backbones due to their well-known thermal and chemical stability. The introduction of pyridine groups provides the polar groups that can interact with the phosphoric acid, resulting thus in the desired ionic conductivity. The pyridine moieties were introduced through monomeric diols that contain one or two pyridine units. These new diols were synthesized using palladium-mediated cross coupling (Suzuki coupling), between aryl boronic acids and aromatic dihalogens. Aromatic polyethers were prepared by high temperature polymerization of the above mentioned diols with aromatic difluorides. First, homopolymers with one (PPyPO) or two pyridine rings (PQDPyEtO) were prepared, followed by characterization of their properties with conventional techniques. Polymer PPyPO, presents good mechanical properties, high Tg values, high thermal and oxidative stability, high doping ability with H3PO4 and high ionic conductivity values. Polymer PQDPyEtO was synthesized with the view of increasing the polar centers in the main chain of the polymers. The diol used in this case, which was substituted with ethyloxy groups for solubility reasons, resulted in a significant decrease of glass transition temperature of the final materials. Furthermore, polysulfone copolymers containing the substituted five-ring diol, were prepared. Depending on the content of the pyridine monomer, low or high molecular weight copolymers were prepared, resulting in low or high quality films, respectively. Next, polymer blends were prepared in order to combine the desired properties of separate components and improve the properties of the final material. In all cases, miscible blends with high Tg values, high oxidative stability and high acid uptakes were obtained. After the synthesis and characterization of new polymers and polymer blends, some of them were selected in order to be further tested in single cells. Between the different polymers and copolymers, the one that fulfills all the prerequisites to be used as electrolyte in PEMFCs, is PPyPO. Nevertheless, its moderate dimensional stability when doped with phosphoric acid did not allow either the MEA’s construction or the further application of this system in fuel cell. The combination of PPyPO with the copolymer PPy(50)coPSF led to materials that retain their dimensional stability after doping with H3PO4. Apart from this system, blends of other synthesized copolymers with PPy(50)coPSF were prepared. Between the different compositions, the 50/50 blends were selected since they meet all the requirements in order to be used as electrolytes in high temperature PEMFCs. Thus, MEAs were constructed using the aforementioned polymer blends as electrolytes. The MEAs prepared, were tested in 2x2 cm2 and 5x5 cm2 single cells, and their fuel cell performance was studied for the temperature range 130-150 oC. The obtained results were comparable to PBI’s which is the state-of-the art high temperature electrolyte. Finally, a preliminary study of conduction mechanism as well as of the effect of humidity and temperature in the electrolyte’s conductivity was performed.

Degree

thesis:*
Grantor dc:publisher
University of Patras
Year dc:date
2006

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Gourdoupi, Nora
  • Γουρδούπη, Πανωραία

Subjects

dc:subject × 16

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/18135

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Gourdoupi, Nora; Γουρδούπη, Πανωραία. Σύνθεση και χαρακτηρισμός πολυμερών που παρουσιάζουν ιοντική αγωγιμότητα. University of Patras, 2006. http://hdl.handle.net/10442/hedi/18135