Back to search

National Technical University of Athens (NTUA)

Μακροπορώδες πυρίτιο ως διηλεκτρικό για τοπική ηλεκτρική μόνωση στο πυρίτιο και ως μήτρα για ηλεκτρικές διασυνδέσεις διαμέσου του δισκιδίου

Abstract

dc:description

This thesis was devoted to the investigation of the electrochemical growth of macroporous Si, the study of its structural and dielectric properties and the investigation of cavity formation underneath macroporous Si, as well as pore and cavity filling with Cu. Two different applications of macroporous membranes were developed, namely heat sink technology using copper-filled macroporous Si and cavity underneath and microplate technology for on-chip RF isolation. The first three chapters contain a literature study of porous Si formation and properties and a universal model that explains pore growth in both mesoporous and macroporous Si is more extensively presented. This dominant model is the Current Burst Model (CBM), the basic premises of which are described in the first chapter of this dissertation. We found that the results presented in this thesis regarding the electrochemical behavior of the Si/electrolyte system are predicted by this specific model. The second chapter of the thesis deals with the literature of the electrochemical deposition of Cu into porous Si, while the thirst chapter describes morphological characteristics of the different porous Si structures. The special structural elements of macroporous Si that distinguish it from any other porous Si material are discussed. These include large pore diameters and pore orientation vertical to the substrate. The state of the art in the electric and dielectric properties of porous Si is also discussed at the end of this chapter. The experimental results of this thesis are presented in chapters 4-7. Chapter four deals with the fabrication of macroporous Si layers in medium and highly doped p-type Si substrates. The fabrication process of macropore arrays with square or circular intersection is described. In the case of p⁺-type Si substrates, the diameter of the pores was in the range of 1-8μm with almost no size dispersion. Optimized electrolyte composition resulted in smooth, vertical walls. In the case of p⁺-type substrates, pore diameter size down to 50nm was achieved. The macropore arrays were also developed on predefined areas using a specific sequence of clean room processes. A novel Si nano-patterning technology through a porous anodic alumina masking layer, self assembled on Si was also developed and used for the fabrication of hexagonally ordered macropores with large surface density. A technology of pattern transfer that uses either dry or wet chemical or electrochemical etching was developed. The combination of the above three techniques constitute a materials platform for the development of a novel non-lithographic technology of Si nano-patterning. Using this technology, hexagonally ordered nanostructures with minimum size dispersion and large surface density were achieved. The nanostructures were in the form of inverted pyramids or semispherical pits on Si and exhibited high order and homogeneity. The structures were also fabricated in predefined areas, using a pre-patterned masking layer that withstands the electrochemical solution. In a next step the obtained structures were used as pore initiation sites for the fabrication of hexagonally ordered macropores with diameter <200nm. The fabricated porous layers replicate the pore pattern of porous anodic alumina used as masking layer. Macroporous layer thickness reached 1.5pm, which was the maximum thickness ever fabricated in literature. Chapter five comprises the experimental results of the electrochemical deposition of Cu into a porous Si template and the description of the fabrication of copper microwires and Si/Cu composite structures. First, the electrochemical process that leads to homogeneous and electrically consistent copper microwires is presented. Next, it is shown that the wires can be separated from the template or used as vias through the wafer. In the second part of this chapter, the electrochemical fabrication of macroporous Si suspended membranes over air cavities is described. In addition to that, a novel method according to which the deposition of copper can be combined with the suspended membranes technology is presented. With this method composite Si/Cu structures were achieved. This way, Cu micro-heat sinks embedded in the Si substrate were constructed for use in IC cooling. The micro-coolers were characterized electrically and simulation was used to calculate the temperature distribution in such a composite material structure after a heat pulse is applied at a certain area of the surface. It was found that the fabricated structure works as an efficient heat sink. The final chapter of this research is devoted to the development of on-chip RF isolation technology using porous Si as a local microplate that reduces RF losses. Porous Si microplates, fabricated with CMOS compatible processing with thickness exceeding 200μm, were studied and their complex permittivity was measured by designing and fabricating Coplanar Waveguides (CPWs) on top of the porous membranes. Thick mesoporous and macroporous Si layers were compared in this respect. The experimental results were compared to theoretical results using electromagnetic simulations of the structures and comparing the measured and simulated S-parameters over a broadband frequency region. The measured results show that, for CPW features consistent with the scale of on-chip RF passive devices, a 50-μm-thick mesoporous and a 25pm macroporous Si layer on the Si substrate reduce the losses to 1/6th-1/4th of the values corresponding to a p-type Si substrate, showing that porous Si is an excellent material for CMOS-compatible on-chip integration of high-Q passive devices. In conclusion, the work performed within this thesis opens important possibilities for using macroporous Si in on-chip RF isolation and IC thermal cooling. It also offers a novel Si nanopatterning technology that gives the possibility of fabricating hexagonally ordered macropores with until now “forbidden” diameters.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Zacharatos, Filimon
  • Ζαχαράτος, Φιλήμων

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/18274

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Zacharatos, Filimon; Ζαχαράτος, Φιλήμων. Μακροπορώδες πυρίτιο ως διηλεκτρικό για τοπική ηλεκτρική μόνωση στο πυρίτιο και ως μήτρα για ηλεκτρικές διασυνδέσεις διαμέσου του δισκιδίου. National Technical University of Athens (NTUA), 2009. http://hdl.handle.net/10442/hedi/18274