Back to search

National Technical University of Athens (NTUA)

Σχεδιασμός και ανάπτυξη συστημάτων εκτίμησης βιομηχανικού κινδύνου σε εγκαταστάσεις διϋλιστηρίων

Abstract

dc:description

The main objectives of the PhD Thesis are the examination of the credibility of currently used models which have been proposed by the main research teams of the Process Safety area, the recognition of critical parameters that are used in these models and the development of new models in areas where the existing ones are not sufficient to describe the accidents. The implementation of the models is being performed in case studies of an existing refinery. The credibility of the mathematical models that are being used by the most important research units concerning industrial safety is being performed mainly through their mutual comparison. In any case, the connection of the existing models with the main, basic and undoubtable equations of Chemical Engineering (such as the Bernoulli equation, heat and mass balances, etc.) is being investigated. The various types of models (source and consequence models) are being presented based on the industrial accident category. For the estimation of the critical parameters that are introduced in the models described above, the sensitivity analysis method is being used. During the analysis of existing models, the lack of a deterministic model aiming at the description and precognition of domino effects has been identified. This kind of events can take place in various cases, while the more often ones regard the exposure of a storage tank in the radiation of an external heat source (usually fire) of the same area. The model being developed in the PhD thesis describes this specific case, combining known theories (heat transport mechanisms, interchange of boiling and evaporation regimes) in an original way, based on the fact that it is important that the analysis is being performed separately for each different part, according to the special characteristics and conditions that dominate it. For the implementation of the existing mathematical models that have been described in the first part (credibility testing), of the sensitivity analysis, and of the new domino model that has been developed in the context of the present PhD thesis, a new software has been created. The CIADEM software (Computations of Industrial Accidents - Domino Effect Modeling) has been created using the Microsoft Excel program. Its results are usable, practical, and highly in line with the empiric knowledge acquired by a variety of - by case- similar accidents. In the same time, the results are following the principles of fluid mechanics and thermodynamics.

Degree

thesis:*
Grantor dc:publisher
National Technical University of Athens (NTUA)
Year dc:date
2009

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Ντεμίρη, Σπυριδούλα

Subjects

dc:subject × 14

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/18523

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Ντεμίρη, Σπυριδούλα. Σχεδιασμός και ανάπτυξη συστημάτων εκτίμησης βιομηχανικού κινδύνου σε εγκαταστάσεις διϋλιστηρίων. National Technical University of Athens (NTUA), 2009. http://hdl.handle.net/10442/hedi/18523