National Technical University of Athens (NTUA)
Κατασκευή και χαρακτηρισμός αισθητηρίων τύπου αγωγιμότητας για την ανίχνευση χημικών ενώσεων
Abstract
dc:descriptionThe goal of this doctoral thesis is the design and the fabrication of micromachined conductometric gas sensors, for the detection of chemical compounds (NH₃, NO, CO), operating at low power mode. The sensors are based on porous silicon, a material with a very low thermal conductivity that results in low power consumption. The fabricated sensors are based on two basic types of micro-hotplates: (a) suspended with four supporting beams to the substrate and (b) with one supporting beam to the substrate (cantilever type). The extensive characterization of the micro-hotplates (using thermography) have shown that a temperature increase rate of 23°C/mW, can be achieved, which represent one of the best reported rates in literature. Additionally, the fabricated devices are exhibiting an excellent mechanical stability. Concerning the characterization of the chemical sensors in gas environment, the change in conductivity towards various sensitive materials (SnO₂, SnO₂:Pd, WO₃:Cr) was studied. The tested sensors were fabricated using two different techniques: (a) sputtering and (b) micro-dropping. The measurements were realized utilizing two methodologies: the constant operation mode (constant potential) and the pulsed operation mode (potential pulses), towards a series of different gas environments: ammonia (NH₃), nitrogen monoxide (NO) and carbon monoxide (CO). For all of the sensitive materials, the sensors have shown the highest sensitivity towards the nitrogen monoxide, then towards ammonia and finally towards carbon monoxide. The comparison of the sensitive materials, using the same gases and the same concentrations, have shown that the SnO₂:Pd exhibits the highest sensitivity. Finally, using the pulsed temperature mode of operation, the sensitivity of the sensors was further increased, with very low power consumption. It should be also stated that the response time of all the tested sensors was in the range of a few seconds, for the custom operating conditions.
Degree
thesis:*- Grantor dc:publisher
- National Technical University of Athens (NTUA)
- Year dc:date
- 2009
Author and committee
dc:creator, dc:contributor.*- Authors dc:creator
-
- Triantafyllopoulou, Roubini
- Τριανταφυλλοπούλου, Ρουμπίνη
Subjects
dc:subject × 18- Αιωρούμενες μικροθερμαντικές πλάκες
- Πορώδες πυρίτιο
- Διατάξεις τύπου προβόλου
- Αισθητήρες αερίων, Μικρομηχανικοί
- Ισχύς, Χαμηλή κατανάλωση
- Ανίχνευση αερίων (NH₃, NO, CO )
- Λειτουργία με σταθερή τάση και παλμούς τάσης
- Suspended micro hotplates
- Porous silicon
- Cantilever type devices
- Micromachined gas sensors
- Low power consumption
- Gas detection (NH₃, NO, CO)
- Constant and pulsed voltage operation mode
- Φυσικές Επιστήμες
- Φυσική
- Natural Sciences
- Physical Sciences
Rights
- Language dc:language
- gre
Identifiers
dc:identifier.*- Identifier
- 10.12681/eadd/18528