Back to search

National and Kapodistrian University of Athens

Παραγωγή προϊόντων αλκοολικής ζύμωσης με χρήση ακινητοποιημένων ζυμομυκήτων

Abstract

dc:description

In this work yeast cells were entrapped in single or double layer calcium alginate beads coated with chitosan. These beads were used for the alcoholic fermentation of carbohydrates. In the first part of this work it was attempted to define the optimal conditions for the construction of the double layer alginate - chitosan beads. Several construction parameters of these beads were studied. These parameters included the composition of the inner and the outer layer, the concentration of chitosan in the coating solution, the period of time that these beads should be left in the coating solution and the initial cell loading in the inner layer of the beads. In addition the procedure for the construction of the beads was taken in consideration. The influence of the above parameters on the behaviour of the beads and the behaviour of the entrapped yeast cells during fermentations was studied. As a result of the coating the calcium alginate beads with chitosan was the increase of their mechanical and chemical stability. The coating of beads with chitosan had no effect on the behaviour of the entrapped cells. The procedure for the construction of the beads followed a certain procedure: Construction of the double layer alginate beads was followed by the coating of beads with chitosan. The presence of the outer layer and the polyelectrolyte complex between the alginate and the chitosan hindered the cell leakage from the beads into the medium in a high level. Both the concentration of the alginate in the outer layer and the coating with chitosan did not have any effect on the kinetics of the fermentations and the composition of the products. Increasing the concentration of the coating solutions up to 10 g chitosan/l resulted in the improvement of the behaviour of the beads. The period of time needed for the coating of the beads in the chitosan solution was approximately the same as the period of time needed for the reaction between most of the alginate of the beads with the chitosan. The staying of the beads in the chitosan solution for a greater period of time didn’t improve the behaviour of the beads, while it had a negative effect on the behaviour of the entrapped cells. The initial cell loading found to be an important parameter for the construction of the beads. Lower cell loading resulted in the increase of cell leakage while higher cell loading increased the fermentation rate but reduced the mechanical stability of the beads. In the second part of this work yeast cells entrapped in the double layer alginate - chitosan beads were used for the continuous production of wine. Also “free” yeast cells from the same strain and “free” yeast cells from the must were used under similar conditions for the production of wine by the procedure of batch fermentation. The maximum productivity of wine and ethanol achieved during the continuous process was 3 - 4 times higher than the productivity achieved during the batch processes. The wines produced by the immobilized and “free” yeast cells from the same strain were similar in the final composition with the only difference that the concentration of the higher alcohols was lower for the wines produced by the immobilized yeast cells.

Degree

thesis:*
Grantor dc:publisher
National and Kapodistrian University of Athens
Year dc:date
2007

Author and committee

dc:creator, dc:contributor.*
Authors dc:creator
  • Δριχούτης, Παναγιώτης
  • Drichoutis, Panagiotis

Subjects

dc:subject × 20

Rights

Language dc:language
gre

Identifiers

dc:identifier.*
Identifier
10.12681/eadd/18568

Chain of custody

source
Harvested from
Greek National Archive of PhD Theses
Base URL
phdtheses.ekt.gr/eadd_oai/request
Last updated
2026-11-18
Source record
OAI-PMH GetRecord
citation

Δριχούτης, Παναγιώτης; Drichoutis, Panagiotis. Παραγωγή προϊόντων αλκοολικής ζύμωσης με χρήση ακινητοποιημένων ζυμομυκήτων. National and Kapodistrian University of Athens, 2007. http://hdl.handle.net/10442/hedi/18568